NCCCO CORE BUNDLED EXAMS WITH 100% CORRECT ANSWERS

Where is the best location for leveling a crane? Upperworks When determining the "gross load" the best method is: Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? Basket, vertical, choker What is the purpose of using ...

A frequent inspection is: Daily to monthly 1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? Boom Up (Appendix A to Subpart CC of Part 1926--Standard Hand Signals) 2. ...

1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? a. Boom down b. Swing c. Boom up d. Extend boom c. 2. When hoisting personnel, within what percentage of level must a tele...

Boom up What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? 1% When hoisting personnel, within what percentage of level must a telescopic boom crane be in order for the gross ratin...

ancillary attachment devices attached to the crane that perform functions other than lifting a load with a hook, such as forks, augers, grapples, or a digging bucket anti-two block device a device that prevents two blocking from occurring if crane is used with load hoist mechanism co...

Timber or steel These materials should be used when setting up on soft surfaces such as soft ground, asphalt or backfilled material Over the corner On crawler cranes, which boom position creates the greatest ground pressure Blocking Allows the weight of the crane and load to be dist...

ASME B30.5 Mobile and Locomotive cranes, all types ASME B30.3 Tower Cranes ASME B30.23 Personel Lifting Regs OSHA 29 CFR 1926.1400 Series Cranes & Derrick's used in Construction regs. Rotation Resistant Wire Rope 2 randomly broken wires in 6 diameters. 4 randomly...

When tower crane is erected/dismantled, written instructions must be correct answersOn site Tower crane erection/dismantling shall be performed under direct supervision of the correct answersDesignated person What is the minimum clearance from obstruction when the tower crane freely rotates 36...

The crane is out of level, you release the swing break, the boom swings downhill, your: correct answersLoad radius increases Blocking can be placed under the ends of tracks to: correct answersIncrease the cranes stability when Operating over front or back What quadrant produces the least amoun...

Before leveling a mobile crane on outriggers, an operator should ensure: correct answersthere is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? correct answersKeeping 90 degree angle between cyl...

continuously correct answersduring all crane movements, asme b30.5 states that communication shall be maintained stop crane movements correct answersif the communication is disrupted at any time while the crane is operation, the operator shall osha 1926.1400 appendix a correct answersOSHA's s...

Where is the best location for leveling a crane correct answersUpperworks When determining the "gross load " the best method is: correct answersGet an accurate load weight and add rigging By order of hitch strength, which is the correct Answer? correct answersBasket, vertical, chocker Wha...

What is the max included angle for a shackle? correct answers120 Degrees Wire rope clips and wedge sockets shall be designed to have a minimum connection efficiency of? correct answers80 % The center of gravity location of a load may _________of the load correct answersNot be located on the ac...

OSHA 1910 correct answersGeneral Industry Standards OSHA 1926 correct answersConstruction Industry Standards OSHA 1910.180 correct answersCrawler, Locomotive and Truck Cranes OSHA 1910.184 correct answersSlings OSHA 1926.251 correct answersRigging Equipment used for material handling ...