100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Millwright Questions And Answers 100% correct Verified $79.49   Add to cart

Package deal

Millwright Questions And Answers 100% correct Verified

Millwright Questions And Answers 100% correct Verified

24 items

Millwright-Preventive and Predictive Maintenance Questions And Answers 100% correct Verified

(0)
$12.49

Preventive maintenanceis the periodic inspection and maintenance of plant assets and equipment to uncover conditions that may to equipment failure or shortened life This measures the amount of contaminants per litre of fluid. a. ferromagnetic analysis b. total base number c. infrared tests d. ...

View example

Millwright - Lubrication Questions And Answers 100% correct Verified

(0)
$20.49

1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid b. Extreme pressure lubricant 2. The most common measurement of kinematic viscosity is what? a. Viscosity b. Centistokes c. Viscosity in...

View example

Millwright - Safety Questions And Answers 100% correct Verified

(0)
$7.99

What is the fire triangle? a. Wood, coal, combustibles b. Heat, fuel, oxygen c. Class A, B, C d. Green triangle, blue circle, red squareb. Heat, fuel, oxygen Whose responsibility is it for you to wear Protective equipment in good order? a. Your own b. Plant manager c. Manufacturer d. Superv...

View example

Millwright - Rigging and Hoisting Questions And Answers 100% correct Verified

(0)
$20.49

1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to retain 250lbs? a. 50 lbs b. 100 lbs c. 250 lbs d. 75 lbs a. 50 lbs 250lbs/5 = 50 lbs 2. What diameter rope is needed to support two tons using a vertical lift? a. ½" b. ¾" c. 1" d. ¼" a...

View example

Millwright - Rigging and Hoisting Questions And Answers 100% correct Verified

(0)
$20.49

1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to retain 250lbs? a. 50 lbs b. 100 lbs c. 250 lbs d. 75 lbs a. 50 lbs 250lbs/5 = 50 lbs 2. What diameter rope is needed to support two tons using a vertical lift? a. ½" b. ¾" c. 1" d. ¼" a...

View example

Millwright-IP Questions Questions And Answers 100% correct Verified

(0)
$7.99

What controls the servo valve in a hydraulic governorElectrical controller What is the purpose of a sleeveTo reduce shaft wear Why are gate valves used on pump inlet and outletsFor isolation What does misaligned bearing bores causeBent shaft an instrument wear What is the purpose of return idler...

View example

Millwright 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$8.49

Auxiliary Viewview where a slanted surface is projected to a plane that is parrallel to the surface perspective, oblique, isometric3 types of sketches ObliqueFront face is of an object is drawn the same way as the front view of an orthographic Obliquedepth is shown by parallel lines drawn at an ...

View example

Millwright. Bearings 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$7.99

Two kinds of flat bearings differ from there housings they are A. Solid end of friction B. Tight and tapered C. Scored and roller D. Solid and splitD. Solid and split **The choice of bearing tens of the load rotational speed direction of Pull and support design solid bearings and split bearing...

View example

Millwright study Questions And Answers 100% correct Verified

(0)
$30.49

3 Things you have the right to know in regards to safe work are:1) you have the right to know (hazards of the work) 2) you have the right to refuse (unsafe work) 3) you have the right to participate (safety planning) A green tag on boots indicates that:The boots are CSA aprroved Action of a dou...

View example

Millwright Rigging & Lifting Questions And Answers 100% correct Verified

(0)
$12.49

The breaking strength of rope is a. force needed to pull rope b. force needed to tear rope c. force needed to break the rope d. force needed to stretch ropec. force needed to break the rope Traction grade wire rope has a breaking load of __________ tons per square inch a. 110-190 b. 50-60 c....

View example

Millwright Power Transmission Questions And Answers 100% correct Verified

(0)
$16.49

Advantage of using a chain coupling is that they A. Are easy to disconnect B. Are non-lubricating C. High vibration dampening capabilities D. All the above A. Are easy to connect A coupling that could be used for high torque or power application is the A. Sleeve coupling B. Roller chain coupl...

View example

Millwright level one Questions And Answers 100% correct Verified

(0)
$5.49

NCCER was created to Award a college degree for completion of the NCCER Standardized Curricula The purpose of NCCER's Registry is to. Provide industry-wide credential and assure national portability of skills. Two of the more important traits of the professional Millwright are. Honesty and int...

View example

Millwright level one Questions And Answers 100% correct Verified

(0)
$6.99

which of the following tools would be used on a polished steel assembly. strap wrench The type of wrench designed for use on a specific part is the ______ wrench. Spanner what kind of tool do you use for packing. Packing gauge Can you use a Tubing Cutters tool to cut steel pipe too. False A honi...

View example

Millwright Level 2 - Bearings Questions And Answers 100% correct Verified

(0)
$8.49

The NC board of Dental Examiners consist of:6 dentist who are licensed to practice dentistry in NC, 1 Hygienist licensed in NC, 1 consumer member. A Dental hygiene license application needs to be submitted to the board's office beforeJanuary 1st In NC the following functions may not be delegate...

View example

millwright level 2 Rigging 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$5.49

saddlethe safe working load of a rigging hook is accurate only when the load is suspended from the ______________ of the hook 15OSHA requires that a hook be replaced if the throat has opened _____ percent or more from it's original size. 40A hook that is point loaded co

View example

Millwright Intermediate Trade Math Questions And Answers 100% correct Verified

(0)
$5.49

Area of TriangeA=1/2bh Area of a circleA=πr² Volume of a rectangular solidV=lwh Volume of a cylinderV=πr²h Volume of a sphere

View example

Millwright Hydraulics and Pumps Questions And Answers 100% correct Verified

(0)
$5.49

Demulsibility is the ability of oil to a. absorb into another substance b. absorb into water c. separate from water d. maintain visibility c. seperate from water When oxidati

View example

Millwright Exam Prep 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$11.49

1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and e

View example

Millwright Exam 1 100qs 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$70.49

Millwright Exam 1 100qs 2023/2024 Update Questions And Answers 100% correct Verified

View example

Millwright Exam 1 100qs 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$16.49

Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly moreb. less What rope is considered to be a standard wire

View example

Millwright 2023/2024 Update Questions And Answers 100% correct Verified

(0)
$19.49

On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed:1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is:aluminum oxide A blotter is used on a grinding wheel to:protect the flanges from the abrasize grit, display...

View example

Millwright-Installation & Levelling Questions And Answers 100% correct Verified

(0)
$5.49

Most installation procedures start at the machine foundation substructure because? a. the manual says so b. the foundation introduces misalignments in the equipment c. the foundation moves d. the foundation is inconsistantb. the foundation introduces misalignments in the equipment When installi...

View example

Millwright Questions And Answers 100% correct Verified

(0)
$7.99

What are the 2 classes of hydraulics?Hydrostatic & Hydrodynamic What causes pressure drop in a hydraulic line?Excessive Fluid Velocity What causes aeration in a hydraulic pump?Air in the suction line What type of hydraulic cylinder is indicated in the circuit in Figure 1?Adjustable cushion on ex...

View example

Questions Millwright Book 3 (complete) Questions And Answers 100% correct Verified

(0)
$13.99

The fraction equivalent of 6.125 is _________.6 1/8 (p. 1.3/Table 1) The decimal equivalent of 9/16 inch is ________..05625 (p. 1.3/Table 1) One atmosphere equals ________ pounds per square inch.14.696 (p. 1.5/Table 3) If the opposite side in Figure 1 is 4 feet, and the hypotenuse is 35 ft, the a...

View example
Show all
avatar-seller
brightonbrezie12

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller brightonbrezie12. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $79.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79271 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$348.76 $79.49
  • (0)
  Add to cart