NICET Bundled Exams with Complete Solution | Verified | Guaranteed Success

When a device is inaccessible due to excessive height, such as an atrium, what it the maximum interval for testing? - 18 months When installing a wall-mounted fire telephone appliance to the public, what is the acceptable maximum mounting height from the floor? - 66 inches Elevator lobby smoke d...

When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... - 80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested - 10% When testing elevator recall, the elevator sh...

What is a purpose of a control valve - Control Flow to water based fire protection system The gauge on the quick opening device shall indicate _____ as compared to the gauge on the system side of the dry pipe valve? - the same pressure What type of test shall be provided when a valve is returned ...

Where located above floor (within 2.1m or 7ft.) cables shall be securely fastened at intervals of? - not more than 18 inches Which cable types can be installed in fireproof riser shafts? - FPLP, FPLR, and FPL How many THHN conductors can fit in a 3/4 size Rigid PVC conduit? - 17 This is the defi...

Who is responsible for the inspection, testing, maintenance and impairment of a water based fire protection system? - The Property owner or designated representative Who's responsibility is it to provide accessibility to components of a water based fire protection system? - The property owner or...

When placing a LOTO on a system, how many locks should be applied? - As many locks as their are personnel working on the system. A ladder must be able to support ____ times the weight of the expected load - 3.3 It is acceptable to enter into a confined space without an attendant, but only if all ...

Toggle hangers shall be permitted only for the support of pipe __________ inches or smaller in size under ceilings of hollow tile or metal lath and plaster. - 1 2/2 in. (ref. NFPA 13 2016 Sec. 9.2.1.1.2. While conducting a flow test, the chosen hydrant should be ______ - As close to the property w...