Package deal
CWB | Questions with 100% Correct Answers | Updated & Verified
CWB | Questions with 100% Correct Answers | Updated & Verified
[Show more]CWB | Questions with 100% Correct Answers | Updated & Verified
[Show more]To measure the strength of a welded joint what mechanical test would you prescribe? 
 
 
a) A transverse weld tension test. 
b) A charpy test. 
c) A CTOD test. 
d) An all weld metal tension test. 
e) A side bend test. - answer-a) A transverse weld tension test. 
 
 
Select the cutting process that...
Preview 2 out of 6 pages
Add to cartTo measure the strength of a welded joint what mechanical test would you prescribe? 
 
 
a) A transverse weld tension test. 
b) A charpy test. 
c) A CTOD test. 
d) An all weld metal tension test. 
e) A side bend test. - answer-a) A transverse weld tension test. 
 
 
Select the cutting process that...
Preview 1 out of 4 pages
Add to cartCWB level 1 exam prep questions and answers
Preview 1 out of 4 pages
Add to cartCWB level 1 exam prep with complete solution
Preview 3 out of 26 pages
Add to cartCWB 1 exam questions with complete solution
CWB Codes and Standards (Practice Test Questions) with 100% correct answers 2024
Preview 1 out of 2 pages
Add to cartCWB Codes and Standards (Practice Test Questions) with 100% correct answers 2024
CWB 2 All Module Exams questions and answers 2024
Preview 3 out of 19 pages
Add to cartCWB 2 All Module Exams questions and answers 2024
CWB TEST QUESTIONS WITH 1000% CORRECT ANSWERS 2024
Preview 3 out of 23 pages
Add to cartCWB TEST QUESTIONS WITH 1000% CORRECT ANSWERS 2024
CWB Level 2 Study Questions rev 1 WITH 100% CORRECT ANSWERS 
 
 
In parallel electrical circuits, the voltage across each resistor is the same since each path is connected to the same voltage source. Select the correct statement. 
A. in each parallel path the resistance must be equalized to create ...
Preview 4 out of 53 pages
Add to cartCWB Level 2 Study Questions rev 1 WITH 100% CORRECT ANSWERS 
 
 
In parallel electrical circuits, the voltage across each resistor is the same since each path is connected to the same voltage source. Select the correct statement. 
A. in each parallel path the resistance must be equalized to create ...
cwb welding inspector questions and answers 2024 
faying surface - ANSWER-the mating surface of a member that is in contact with or in close proximity to another member to which it is to be joined. 
 
 
joint - ANSWER-the junction of the workpieces that are to be joined 
 
 
supplementary welding sy...
Preview 2 out of 10 pages
Add to cartcwb welding inspector questions and answers 2024 
faying surface - ANSWER-the mating surface of a member that is in contact with or in close proximity to another member to which it is to be joined. 
 
 
joint - ANSWER-the junction of the workpieces that are to be joined 
 
 
supplementary welding sy...
CWB Welding Inspector Level III Study Guide questions and answers
Preview 2 out of 7 pages
Add to cartCWB Welding Inspector Level III Study Guide questions and answers
CWB red seal review test questions and answers 2024
Preview 2 out of 5 pages
Add to cartCWB red seal review test questions and answers 2024
1x sold
CWB 47.1 QUESTIONS AND CORRECT ANSWERS 2024
Preview 2 out of 7 pages
Add to cartCWB 47.1 QUESTIONS AND CORRECT ANSWERS 2024
CWB Level 2 Study Modules 4-5-6-7-8--22 TEST QUESTIONS WITH 100% CORRECT ANSWERS 2024 
 
 
During arc welding there is a zone adjacent to the weld metal that reaches high temperatures but does not melt. What is the name of this region? - ANSWER-Heat Affect Zone (HAZ) 
 
 
In parallel electrical circ...
Preview 4 out of 57 pages
Add to cartCWB Level 2 Study Modules 4-5-6-7-8--22 TEST QUESTIONS WITH 100% CORRECT ANSWERS 2024 
 
 
During arc welding there is a zone adjacent to the weld metal that reaches high temperatures but does not melt. What is the name of this region? - ANSWER-Heat Affect Zone (HAZ) 
 
 
In parallel electrical circ...
Complete the following: 
a) Chromium stabilizes the _____ form of iron 
b) Nickel stabilizes the _____ form of iron - ANSWER-a) bcc 
b) fcc 
 
 
If a straight chromium steel of 18% Cr and < 0.1 % C is heated to 1000°C will it transform to austenite or remain as ferrite? - ANSWER-remain as ferrit...
Preview 2 out of 5 pages
Add to cartComplete the following: 
a) Chromium stabilizes the _____ form of iron 
b) Nickel stabilizes the _____ form of iron - ANSWER-a) bcc 
b) fcc 
 
 
If a straight chromium steel of 18% Cr and < 0.1 % C is heated to 1000°C will it transform to austenite or remain as ferrite? - ANSWER-remain as ferrit...
Preview 2 out of 7 pages
Add to cartCWB Level 2 QUESTIONS WITH CORRECT ANSWERS
CWB MOD 22 Welding Metallurgy of Stainless Steels QUESTIONS AND ANSWERS 2024
Preview 2 out of 11 pages
Add to cartCWB MOD 22 Welding Metallurgy of Stainless Steels QUESTIONS AND ANSWERS 2024
CWB Level II test questions with complete solution
Preview 3 out of 26 pages
Add to cartCWB Level II test questions with complete solution
Preview 4 out of 33 pages
Add to cartCWB Module 1 questions and answers 2024
CWB 2 Visual Weld Inspector Exam questions with 100% correct answers 
 
 
 
 
A consumable electrode is: - answer-AN electrode which melts and provides metal to fill the joint 
 
 
The weld heat affected zone is: - answer-the portion of the base metal adjacent to the weld metal whose properties hav...
Preview 4 out of 73 pages
Add to cartCWB 2 Visual Weld Inspector Exam questions with 100% correct answers 
 
 
 
 
A consumable electrode is: - answer-AN electrode which melts and provides metal to fill the joint 
 
 
The weld heat affected zone is: - answer-the portion of the base metal adjacent to the weld metal whose properties hav...
CWB module 11 Basic inspection technology questions and correct answers 2024
Preview 1 out of 3 pages
Add to cartCWB module 11 Basic inspection technology questions and correct answers 2024
Preview 1 out of 3 pages
Add to cartCWB 2 Module 9 Questions answered 2024
CWB level 1 exam prep questions and answers 2024
Preview 1 out of 3 pages
Add to cartCWB level 1 exam prep questions and answers 2024
CWB Electrodes and Consumables (Practice Test Questions) solved 
 
 
 
 
According to the AWS, the nominal composition of a brown colour-coded tungsten electrode is: - answer-tungsten and 0.25% zirconium oxide (pure tungsten is green) 
 
 
Alloyed tungsten electrodes have some advantages over pure t...
Preview 1 out of 2 pages
Add to cartCWB Electrodes and Consumables (Practice Test Questions) solved 
 
 
 
 
According to the AWS, the nominal composition of a brown colour-coded tungsten electrode is: - answer-tungsten and 0.25% zirconium oxide (pure tungsten is green) 
 
 
Alloyed tungsten electrodes have some advantages over pure t...
CWB Module 12 questions and correct answers 2024
Preview 2 out of 7 pages
Add to cartCWB Module 12 questions and correct answers 2024
1x sold
CSA W47.1 and CSA W59 Exam questions with 100% correct answers 2024 
 
 
CSA Standard W59 covers the welding requirements for what type of steel construction? - answer-The welding requirements of CSA Standard W59 can be applied to carbon and low-alloy welded steel 
 
 
What types of structures are c...
Preview 2 out of 8 pages
Add to cartCSA W47.1 and CSA W59 Exam questions with 100% correct answers 2024 
 
 
CSA Standard W59 covers the welding requirements for what type of steel construction? - answer-The welding requirements of CSA Standard W59 can be applied to carbon and low-alloy welded steel 
 
 
What types of structures are c...
Preview 1 out of 1 pages
Add to cartCWB Electrodes and Consumables (Practice Test Questions) answered
Preview 1 out of 2 pages
Add to cartCWB Electrodes and Consumables (Practice Test Questions) answered
CWB 2 Module 19 Questions answered 2024 
 
 
The upper limit of human hearing is approximately: 
 
 
A) 20Hz 
B) 20kHz 
C) 20MHZ - answer-B) 20kHz 
 
 
A typical frequency used for ultrasonic testing of welds is: 
 
 
A) 2.25MHZ 
B) 2.25kHz 
C) 2.25Hz - answer-A) 2.25MHZ 
 
 
Do transverse waves in ...
Preview 2 out of 5 pages
Add to cartCWB 2 Module 19 Questions answered 2024 
 
 
The upper limit of human hearing is approximately: 
 
 
A) 20Hz 
B) 20kHz 
C) 20MHZ - answer-B) 20kHz 
 
 
A typical frequency used for ultrasonic testing of welds is: 
 
 
A) 2.25MHZ 
B) 2.25kHz 
C) 2.25Hz - answer-A) 2.25MHZ 
 
 
Do transverse waves in ...
CWB level 3 Module 21 practice questions answer correct answers 2024 
 
 
The maximum solubility of carbon in a iron is: 
(a) 2%. 
(b) 0.002%. 
(c) 0.02%. 
(d) There is no solubility. - answer-(c) 0.02%. 
 
 
True or false? 
When a steel is heated into the austenite region, all carbon and most other...
Preview 2 out of 7 pages
Add to cartCWB level 3 Module 21 practice questions answer correct answers 2024 
 
 
The maximum solubility of carbon in a iron is: 
(a) 2%. 
(b) 0.002%. 
(c) 0.02%. 
(d) There is no solubility. - answer-(c) 0.02%. 
 
 
True or false? 
When a steel is heated into the austenite region, all carbon and most other...
CWB Level 2 MODULE 8 INTRODUCTION TO METALLURGY & MATERIAL SPECIFICATION QUESTIONS WITH 100% VERIFIED CORRECT ANSWERS 2024 
 
 
 
 
Exam Question Section 3 
From the following, select the ferrous metals; 
a) wrought iron 
 
 
b) copper 
 
 
c) aluminum 
 
 
d) carbon steel 
 
 
e) stainless steel 
a...
Preview 2 out of 15 pages
Add to cartCWB Level 2 MODULE 8 INTRODUCTION TO METALLURGY & MATERIAL SPECIFICATION QUESTIONS WITH 100% VERIFIED CORRECT ANSWERS 2024 
 
 
 
 
Exam Question Section 3 
From the following, select the ferrous metals; 
a) wrought iron 
 
 
b) copper 
 
 
c) aluminum 
 
 
d) carbon steel 
 
 
e) stainless steel 
a...
CWB Welding Inspector Level 1 - Chapter 1 QUESTIONS WITH 100% CORRECT ANSWERS
Preview 1 out of 4 pages
Add to cartCWB Welding Inspector Level 1 - Chapter 1 QUESTIONS WITH 100% CORRECT ANSWERS
CWB Module 6 ELECTRODES AND CONSUMABLES QUESTIONS AND ANSWERS 2024
Preview 2 out of 8 pages
Add to cartCWB Module 6 ELECTRODES AND CONSUMABLES QUESTIONS AND ANSWERS 2024
CWB 2 Module 7 Questions AND ANSWERS 2024 
 
 
 
 
True or False? 
 
 
Weld metal shrinkage is not proportional to the amount of weld metal. - ANSWER-False 
 
 
True or False? 
 
 
Longitudinal residual stress may be as high as the yield stress of the base metal. - ANSWER-True 
 
 
True or False? 
...
Preview 1 out of 3 pages
Add to cartCWB 2 Module 7 Questions AND ANSWERS 2024 
 
 
 
 
True or False? 
 
 
Weld metal shrinkage is not proportional to the amount of weld metal. - ANSWER-False 
 
 
True or False? 
 
 
Longitudinal residual stress may be as high as the yield stress of the base metal. - ANSWER-True 
 
 
True or False? 
...
CWB Level 2 Module 5 Power Sources for Welding QUESTIONS WITH CORRECT ANSWERS
Preview 3 out of 17 pages
Add to cartCWB Level 2 Module 5 Power Sources for Welding QUESTIONS WITH CORRECT ANSWERS
CWB Module 17 Surface Inspection QUESTIONS WITH CORRECT ANSWERS
Preview 3 out of 16 pages
Add to cartCWB Module 17 Surface Inspection QUESTIONS WITH CORRECT ANSWERS
CWB Level 2 MODULE 7 RESIDUAL STRESS & DISTORTION TEST WITH COMPLETE SOLUTION
Preview 2 out of 11 pages
Add to cartCWB Level 2 MODULE 7 RESIDUAL STRESS & DISTORTION TEST WITH COMPLETE SOLUTION
CWB Level 3 Module 21 Welding Metallurgy of Steels Questions and answers 2024
Preview 1 out of 3 pages
Add to cartCWB Level 3 Module 21 Welding Metallurgy of Steels Questions and answers 2024
CWB Module 16 rev 1 questions with 100% correct answers 2024
Preview 2 out of 5 pages
Add to cartCWB Module 16 rev 1 questions with 100% correct answers 2024
CWB 2 Module 17 Questions and correct answers 2024 
The property of liquids that makes them try to reduce their surface area is known as: 
 
 
A) Capillary action 
B) Surface tension 
C) Viscosity - answer-B) Surface tension 
 
 
True or False? 
"The ability of a liquid to wet a solid surface can b...
Preview 2 out of 6 pages
Add to cartCWB 2 Module 17 Questions and correct answers 2024 
The property of liquids that makes them try to reduce their surface area is known as: 
 
 
A) Capillary action 
B) Surface tension 
C) Viscosity - answer-B) Surface tension 
 
 
True or False? 
"The ability of a liquid to wet a solid surface can b...
Preview 1 out of 2 pages
Add to cartCWB Module 12 Mechanical Testing of Welds Q&A
CWB Level 2 Mod 9 Introduction to Welding Metallurgy of Steel questions and correct answer
Preview 1 out of 3 pages
Add to cartCWB Level 2 Mod 9 Introduction to Welding Metallurgy of Steel questions and correct answer
CWB Module 4 Welding Processes questions and correct answers 
 
 
What is E4918-X? - answer-E=Electrode 
49= tensile strength 
1=position (1=all, 2=Horiz Fillet & Flat, 4=vert down) 
8=coating type 
-X= optional improved toughness 
 
 
What are the three Coating Type Classes? - answer-EXX10 & EXX11...
Preview 2 out of 9 pages
Add to cartCWB Module 4 Welding Processes questions and correct answers 
 
 
What is E4918-X? - answer-E=Electrode 
49= tensile strength 
1=position (1=all, 2=Horiz Fillet & Flat, 4=vert down) 
8=coating type 
-X= optional improved toughness 
 
 
What are the three Coating Type Classes? - answer-EXX10 & EXX11...
CWB Welding - Chapter 1 questions with correct answers 2024
Preview 1 out of 3 pages
Add to cartCWB Welding - Chapter 1 questions with correct answers 2024
W47.1 Practice One questions and answers 2024 
 
 
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. - answer-True 
 
 
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification - an...
Preview 2 out of 6 pages
Add to cartW47.1 Practice One questions and answers 2024 
 
 
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. - answer-True 
 
 
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification - an...
Level 1 CSA 178.2 questions and answers 2024
Preview 2 out of 7 pages
Add to cartLevel 1 CSA 178.2 questions and answers 2024
Preview 1 out of 3 pages
Add to cartCSA W47.1 QUESTIONS AND ANSWERS 2024
Preview 2 out of 7 pages
Add to cartCWB Module 10 Questions with complete solution
CWB 2 Module 22 Questions 100% solved 2024 
 
 
Complete the following: 
 
 
A) Chromium stabilizes the _______ form of iron. 
B) Nickel stabilizes the _______ form of iron - answer-A) BCC 
B) FCC 
 
 
If a straight chromium steel of 18% Cr and < 0.1% C is heated to 1,000°C will it transform to ...
Preview 1 out of 4 pages
Add to cartCWB 2 Module 22 Questions 100% solved 2024 
 
 
Complete the following: 
 
 
A) Chromium stabilizes the _______ form of iron. 
B) Nickel stabilizes the _______ form of iron - answer-A) BCC 
B) FCC 
 
 
If a straight chromium steel of 18% Cr and < 0.1% C is heated to 1,000°C will it transform to ...
CWB Module 16 questions with correct answers 2024
Preview 2 out of 7 pages
Add to cartCWB Module 16 questions with correct answers 2024
CWB MOD 19 ULTRASONIC INSPECTION TEST QUESTIONS WITH CORRECT ANSWERS 2024 
Exercise Questions - Section 1 & 2 
 
 
1. The upper limit of human hearing is approximately 
 
 
a) 20 Hz 
 
 
b) 20 kHz 
 
 
c)20 MHz 
b) 20 kHz 
 
 
 
 
Exercise Questions - Section 1 & 2 
 
 
2. A typical frequency used f...
Preview 2 out of 14 pages
Add to cartCWB MOD 19 ULTRASONIC INSPECTION TEST QUESTIONS WITH CORRECT ANSWERS 2024 
Exercise Questions - Section 1 & 2 
 
 
1. The upper limit of human hearing is approximately 
 
 
a) 20 Hz 
 
 
b) 20 kHz 
 
 
c)20 MHz 
b) 20 kHz 
 
 
 
 
Exercise Questions - Section 1 & 2 
 
 
2. A typical frequency used f...
1x sold
CWB Welding - Chapter 4 (Metallurgy and Material Specification) questions with correct answers 2024 
 
 
Alloy steels are typically used for: - ANSWER-Tools and gears. 
 
 
Engineering materials are classified as metals and: - ANSWER-Non-metals. 
 
 
Which of the following elements is used as an all...
Preview 2 out of 5 pages
Add to cartCWB Welding - Chapter 4 (Metallurgy and Material Specification) questions with correct answers 2024 
 
 
Alloy steels are typically used for: - ANSWER-Tools and gears. 
 
 
Engineering materials are classified as metals and: - ANSWER-Non-metals. 
 
 
Which of the following elements is used as an all...
AWS-CWI Part B Test 1 questions and a answers 2024 
There is a weld that was bent outside the bend radius of the shoe and no fracture on the bend. what should be done when this is noted? - answer-Cut another specimen from the original specimen and bend it. 
 
 
All structural steel fillet welds that...
Preview 2 out of 5 pages
Add to cartAWS-CWI Part B Test 1 questions and a answers 2024 
There is a weld that was bent outside the bend radius of the shoe and no fracture on the bend. what should be done when this is noted? - answer-Cut another specimen from the original specimen and bend it. 
 
 
All structural steel fillet welds that...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller AnswersCOM. Stuvia facilitates payment to the seller.
No, you only buy these notes for $22.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
53022 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now