CWB BOOK 4 WELDING PROCESSES & EQUIPMENT 2024CWB LEVEL II KEY REVIEW POINTS- MODULES 1 TO 22 2024CWB 47.1 2024CWB 2024CWB CODES AND STANDARDS PRACTICE TEST QUESTIONS 2024CWB MODULE 16 2024CWB MODULE 10 2024CWB 2 ALL MODULE EXAMS 2024CWB MODULE 1 2024CWB LEVEL 2 2024 CWB 1 2024CWB LEVEL 2 CLOSED BOO...
[Show more]
To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test. b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - CORRECT ANSWER a) A transverse weld tension test. Select the cutting proc...
Preview 2 out of 10 pages
Add to cartTo measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test. b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - CORRECT ANSWER a) A transverse weld tension test. Select the cutting proc...
1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - CORRECT ANSWER b) B...
Preview 4 out of 46 pages
Add to cart1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - CORRECT ANSWER b) B...
What is the description of damage of a brittle fracture? - CORRECT ANSWER Sudden rapid fracture under stress (residual or applied) where material exhibits little or no evidence of ductility or plastic deformation What type of Steel are of primary concern with brittle fractures? - CORRECT ANSW...
Preview 2 out of 12 pages
Add to cartWhat is the description of damage of a brittle fracture? - CORRECT ANSWER Sudden rapid fracture under stress (residual or applied) where material exhibits little or no evidence of ductility or plastic deformation What type of Steel are of primary concern with brittle fractures? - CORRECT ANSW...
What are the 5 main categories for LP indications - CORRECT ANSWER 1. Continuous Line 2. Intermittent Line 3. Rounded 4. Small Dots 5. Diffused or weak surface tension - CORRECT ANSWER property of a liquid that tends to reduce the area of the surface contact angle - CORRECT ANSWER ...
Preview 2 out of 9 pages
Add to cartWhat are the 5 main categories for LP indications - CORRECT ANSWER 1. Continuous Line 2. Intermittent Line 3. Rounded 4. Small Dots 5. Diffused or weak surface tension - CORRECT ANSWER property of a liquid that tends to reduce the area of the surface contact angle - CORRECT ANSWER ...
True or False? Creating a safe working environment is strictly the responsibility of the employer? - CORRECT ANSWER False, it the the joint responsibility of the employer and employee. WHMIS stands for: a) Workers Health Monitoring System b) Workplace Hazardous Materials Information Sy...
Preview 4 out of 58 pages
Add to cartTrue or False? Creating a safe working environment is strictly the responsibility of the employer? - CORRECT ANSWER False, it the the joint responsibility of the employer and employee. WHMIS stands for: a) Workers Health Monitoring System b) Workplace Hazardous Materials Information Sy...
A Plasma is: A) A gas made up of positive ions and free electrons B) A liquid used to reduce adherence of spatter C) The main component in an inverter power source D) Always present in an electrical circuit - CORRECT ANSWER A) A gas made up of positive ions and free electrons To increas...
Preview 3 out of 26 pages
Add to cartA Plasma is: A) A gas made up of positive ions and free electrons B) A liquid used to reduce adherence of spatter C) The main component in an inverter power source D) Always present in an electrical circuit - CORRECT ANSWER A) A gas made up of positive ions and free electrons To increas...
Where do transverse cracks occur? (a) weld metal and base metal (b) weld metal only (c) base metal only (d) weld craters - CORRECT ANSWER (a) weld metal and base metal Porosity may occur: (a) open to the surface of the weld only (b) in the heat-affected zone only (c) below the sur...
Preview 2 out of 12 pages
Add to cartWhere do transverse cracks occur? (a) weld metal and base metal (b) weld metal only (c) base metal only (d) weld craters - CORRECT ANSWER (a) weld metal and base metal Porosity may occur: (a) open to the surface of the weld only (b) in the heat-affected zone only (c) below the sur...
To ensure that calipers are accurate you would a) use a vernier b) calibrate them c) always take a reading to three decimal places - CORRECT ANSWER b) calibrate them 2. True or False? "Systematic errors can always be avoided by using a sufficiently precise measuring instrument." - ...
Preview 2 out of 12 pages
Add to cartTo ensure that calipers are accurate you would a) use a vernier b) calibrate them c) always take a reading to three decimal places - CORRECT ANSWER b) calibrate them 2. True or False? "Systematic errors can always be avoided by using a sufficiently precise measuring instrument." - ...
The AWS D1.1 Structural Welding Code-Steel - CORRECT ANSWER includes welding procedure and performance qualification requirements The CSA is one organization accredited by the Standards Council of Canada for developing standards related to joining and inspection. Name another one. - CORRECT...
Preview 1 out of 3 pages
Add to cartThe AWS D1.1 Structural Welding Code-Steel - CORRECT ANSWER includes welding procedure and performance qualification requirements The CSA is one organization accredited by the Standards Council of Canada for developing standards related to joining and inspection. Name another one. - CORRECT...
True or False? "Electric current is readily conducted in metal (low resistance) because of the many free electrons" - CORRECT ANSWER True True or False? "Conventional current flow is from negative to positive." - CORRECT ANSWER False Materials that have a high resistance to c...
Preview 2 out of 14 pages
Add to cartTrue or False? "Electric current is readily conducted in metal (low resistance) because of the many free electrons" - CORRECT ANSWER True True or False? "Conventional current flow is from negative to positive." - CORRECT ANSWER False Materials that have a high resistance to c...
CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. True or False? - CORRECT ANSWER True Certification can be considered as an approval of the products fabricated by a certificated company? True or false?! - CORRECT ANSWER ...
Preview 2 out of 12 pages
Add to cartCSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. True or False? - CORRECT ANSWER True Certification can be considered as an approval of the products fabricated by a certificated company? True or false?! - CORRECT ANSWER ...
What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat t...
Preview 4 out of 44 pages
Add to cartWhat is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat t...
1. AWS groups welding processes based primarily on ?: Mode of energy trans- fer, and the influence of capillary action in the effecting distribution of filler metals in the joint 2. AWS defines welding as?: A joining process producing coalescence of materials by heating them the the welding tempera...
Preview 4 out of 39 pages
Add to cart1. AWS groups welding processes based primarily on ?: Mode of energy trans- fer, and the influence of capillary action in the effecting distribution of filler metals in the joint 2. AWS defines welding as?: A joining process producing coalescence of materials by heating them the the welding tempera...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACELEARNERS. Stuvia facilitates payment to the seller.
No, you only buy these notes for $55.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
83225 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now