Sspc Bundled Cases 2024 with complete solutions

What are the two broad categories of law that may impact industrial painting. - Answer-Statutory and common What governmental agencies does Statutory laws authorize to promulgate and enforce ? - Answer-EPA Common law torts and contracts. A torts is defined as a ? - Answer-Legal wrong committed by...

What is the highest percentage of lead usage is for manufacturing? - Answer-Battery What is the 3 primary sources of lead in the environment today include lead in? - Answer-Air , Soil and Water which is the principal source of lead to the industrial painter is through exposure to? Air , Water or ...

Which metal would never be used in sacrificial anodes for cathodic protection of steel? - AnswerPlatinum Which surface preparation method is used to create a surface profile? - Answer-Abrasive blasting What is the minimum level of surface cleanliness required when applying an inorganic zinc rich c...

The two air pollutant typically associated with the paint removal industry are - Answer-Lead and particular matter The NAAQS for allowance concentration of lead in air is - Answer-0.15 ug/m3 Ambient air monitor are sited based on - Answer-NAAQS Criteria and 40 CFR... The two values needed to obt...

Nace 1/SSPC-SP-5 - White metal blast cleaning Nace 2/SSPC-SP-10 - Near-white metal blast cleaning Nace 3/SSPC-SP-6 - Commercial blast cleaning Nace 4/SSPC-SP-7 - Brush-off blast cleaning Nace 8/SSPC-SP-14 - Industrial blast cleaning ISO 8501-1, SA 3 - Blast-cleaning to visually clean steel ISO...

What is the purpose of surface prepartion of concrete for coatings and surfacings? - Answer-Good coating adhesion What is the preferred method of repairing unsound concrete that contains no rebar? - Answer-Remove and replace the unsound area with cementitious material What information is availab...

What are the two broad categories of law that may impact industrial painting. - Answer-Statutory and common What governmental agencies does Statutory laws authorize to promulgate and enforce ? - Answer-EPA Common law torts and contracts. A torts is defined as a ? - Answer-Legal wrong committed by...

SSPC SP1 - Solvent Cleaning SSPC-SP2 - Hand Tool Cleaning SSPC-SP3 - Power Tool Cleaning SSPC-SP5 - White Metal Blast SSPC-SP6 - Commercial Blast SSPC-SP7 - Brush-Off Blast SSPC-SP8 - Pickling SSPC-SP9 - Weathering SSPC-SP10 - Near White Metal Blast SSPC-SP11 - Power Tool Cleaning to Bare M...

sacrificial coatings are always used as (primers or top coats) - Answer-primers Galvanizing is better than metallizing because - Answer-it creates an intermetallic layer 3 mechanisms of corrosion control by coatings: - Answer-Barrier protection Chemical inhibitors Cathodic (galvanic) protection ...

Which metal would never be used in sacrificial anodes for cathodic protection of steel? - AnswerPlatinum Which surface preparation method is used to create a surface profile? - Answer-Abrasive blasting What is the minimum level of surface cleanliness required when applying an inorganic zinc rich c...