NCCER Mobile Crane Exam Bundle Rated A+

If the operator is setting up the crane alone, which of the following is required? A. Overhead power lines must be at least 10ft over the boom B. Wind speed cannot exceed on the Beaufort C. The red cones designating the work zone must be set up D. Stabilizers shall be visible to the operator ...

Mobile cranes are governed by standards from two organizations, what are they ? - Answer-OSHA (CFR 1910.180 CFR 1926.1400) AND ASME (B30.5) _______ must always be the first concern of the operator - Answer-Safety ASME standards B30.5 describe several positions related to crane operations: - An...

When determining the "gross load" the best method is: - Answer-Get an accurate load weight and add the rigging By order of strength which is correct - Answer-Basket, Vertical, Choker Primary purpose for a roster sheave or auxiliary boom point sheave is to: - Answer-Separate the hoist line ...

Inspections that are mandated are referred to as what type of inspections? - Answer-compliance inspections frequent inspections are conducted in what intervals - Answer-daily-to monthly periodic inspections are much deeper than frequent inspections and conducted in what intervals - Answer-mont...

In a two crane lift the center of gravity should be - Answer-Closer to the crane with the greatest capacity For rubber-tired cranes working on rubber, the part of the load chart governed by stability is based on what % of the crane's capacity? - Answer-75% As a general rue on tandem crane lif...

In what situation does a hard hat NOT need to be worn when operating a mobile crane? - Answer-When the operator is in an enclosed structure that meets the FOPS regulation FALLING OBJECT STRUCTURE Wind speeds can be variable throughout the working day. What action must be taken to ensure safe work...

Where is the best location for leveling a crane? - Answer-Upperworks. When determining the gross load the best method is? - Answer-Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - Answer-Basket, vertical, choker. What is the primary...

What is the purpose of placing mats or cribbing under or cribbing under outrigger floats? - Answer-Distribute the force over a larger area. Where is the best location for leveling a crane? - Answer-Upperworks. (A revolving frame of equipment on which operating machinery are mounted along operator...

What are the most relevant safety standards? - Answer-29 CFR 1910.180/1926.1400 What does ASME stand for? - Answer-American Society of Mechanical Engineers What is the standard directly related to mobile and locomotive cranes? - Answer-ASME standard b30.5 What must always be first concern t...

What are the two main standards that cover mobile cranes - Answer-Osha 1926.1400 Asme B30.5 What's the first concern of the operator should always be - Answer-Safety What should you do when you doubt the safety of the lift - Answer-Stop and talk to the lift operator NCCER has been accredit...

What are the 2 main standards that cover mobile cranes? - Answer-OSHA 1926.1400 &. ASME B30.5 The first concern of the operator should always be: - Answer-Safety Whenever the operator has doubt as to the safety of the lift they should ______ and report to ______ who can address concerns and re...

what are the two main standard that cover mobile cranes? - Answer-Osha and ASME The first concern of the operator should always be: - Answer-safety Whenever the operator has doubt as to the safety of the lift they should ______ and report to ______ who can address concerns and restart the lift...

When the crane is over-the side, over-the-front, or over-the rear configurations, the center of gravity ids shifted either close or farther away from the? - Answer-Tipping axis (point) When the crane is over-the side, over-the-front, or over-the rear configurations, the center of gravity its shif...