NCCER Test

NCCER Test with Questions and correct Answers 100% Pass already graded A+ An UL listed rod type ground electrode must have minimum length of? 8" in a circuit of pure capacitance, the current leads the voltage by an angle of? 90 Degrees The standard unit for measuring the cross-sectional area of ...

NCCER Module 4 Intro to power tools with questions & correct answers ( 100% ) latest update When using a power drill, proper ground fault protection will prevent - ANSWER>>Electrical shock An example of an AC source of power is - ANSWER>>a wall receptacle When using an air wrench - A...

NCCER Core Module 3 Exam with questions & correct answers latest update already graded A+ Another common name for a lineman's pliers is - ANSWER>>Side cutters To quickly run a nut onto a bolt that resists spinning it on with the fingers , you can drive the socket with a - ANSWER>>Spe...

NCCER module 6 (intro to basic rigging) with Questions and correct Answers Rated A+ latest update if an emergency occurs during a riggin operation. who is allowed to give the emergency stop hand signal? - >>>anyone on ground within sight of the crane operator the max load weight that a sl...

NCCER Module 9 Introduction to Materials Handling with questions & correct answers latest update already graded A+ To prevent a tip over when driving a rough terrain forklift, keep the load________. - ANSWER>>Low The forklift hand signal for "dog everything" means___________. (Clasp hands...

Boilermaker NCCER exam with questions & veried answers 2023/2024 latest update WHEN SHOULD RIGGING MATERIAL BE ATTACHED TO A BEAM TIIAT IS BEING DEMOLISHED? BEFORE ANY BOLTS ARE REMOVED OR ANY CUTTING IS DONE ON THE BEAM WHICH TYPE OF INSOLATION IS REQUIRED BEFORE A VESSEL IS ENTERED? DocING, TA...

NCCER Electrical 1 Module 10 Exam Latest Update Already Graded A Blue Prints - ANSWER>>An exact copy of reproduction of an original drawing Floor plan - ANSWER>>As viewed from above Site plan - ANSWER>>Location of building on the property Surveys show - ANSWER>>All prope...

NCCER Core Module 3 Exam Questions and Answers Already Graded A Another name for a machinist hammer is a - ANSWER>>Ball-peen hammer A heavy duty tool used to drive post or other large stakes is a - ANSWER>>Sledge hammer The proper angle for the edge of a cold chisel - ANSWER>>...

NCCER 00101-15 Basic Safety With Questions And Answers Already Graded A Half Mask or Mouthpiece - ANSWER>>The respirator that would be used where dust or solid particles might be inhaled Blood - ANSWER>>Hepatitis can be caused by contact with Type C Soil - ANSWER>>Benching syst...