Ff1 - ff2 required skills

Don structure ppe #1 Dons pants and boots with all fasteners secured, and suspenders in place Don structure ppe #2 Dons hood, cover ears, head, neck Don structure ppe #3 Dons coat with storm flap closed and collar up and secured Don structure ppe #4 Dons helmet and secured with chin strap Don structure ppe #5 Dons gloves with no skin exposed Don structure ppe #6 Completes with in 60 seconds DON SCBA #1 Verifies SCBA is ready for services, and confirms amount of air in cylinder is above minimum acceptable level DON SCBA #2 Opens SCBA cylinder valve fully, checking gauge for operation, and verbally verifies air cylinder DON SCBA #3 Dons SCBA backpack assembly using the over-the-head or coat method DON SCBA #4 Verifies activation and operation of PASS device DON SCBA #5 Dons face piece DON SCBA #6 Checks face piece seal and operation of exhalation valve DON SCBA #7 Connects face piece to air supply/regulator and checks function by taking several normal breaths DON SCBA #8 Has all personal protective clothing correctly in place DON SCBA #9 Completes all elements within 60 seconds DOFF SCBA #1 Removes SCBA DOFF SCBA #2 Closes cylinder valve completely DOFF SCBA #3 Bleeds air from high and low pressure hosts DOFF SCBA #4 Shuts off PASS device DOFF SCBA #5 Checks air cylinder pressure and replaces cylinder if lass than 90% or rated capacity DOFF SCBA #6 Returns all straps, valves, and components, preparing SCBA for reuse Doff, inspect, and prepare structural ppe for reuse #1 Removes protective clothing Doff, inspect, and prepare structural ppe for reuse #2 Inspects all elements of ppe for damage and cleaning needs •helmet •turnout coat and pants •hood •boots •gloves Doff, inspect, and prepare structural ppe for reuse #3 Describes AHJ cleaning and decontamination policies and procedures Doff, inspect, and prepare structural ppe for reuse #4 Cleans equipment as needed Doff, inspect, and prepare structural ppe for reuse #5 Removes damaged equipment from service and reports to officer (if applicable) Doff, inspect, and prepare structural ppe for reuse #6 Places clothing in a ready state Lift, carry, and raise a ground ladder #1 Wears and uses appropriate ppe/SCBA/equipment at all times during evaluation Lift, carry, and raise a ground ladder #2 Selects proper length ladder for designated task Lift, carry, and raise a ground ladder #3 Lifts and carries ladder utilizing selected single firefighter method with proper verbal commands Lift, carry, and raise a ground ladder #4 Visually checks work area for hazards and states if area is safe or contains hazards Lift, carry, and raise a ground ladder #5 Spots and raises ladder upright Lift, carry, and raise a ground ladder #6 Extends ladder and secures fly (if applicable) Lift, carry, and raise a ground ladder #7 Lowers ladder against stable wall or surfaces Lift, carry, and raise a ground ladder #8 Ties off halyard (if applicable) Lift, carry, and raise a ground ladder #9 Adjust ladder for proper climbing angle and ensures four points of contact Lift, carry, and raise a ground ladder #10 Positions ladder correctly for identified task Lift, carry, and raise a ground ladder #11 Lowers ladder and safely returns it to designated site or apparatus Lift, carry, and raise a ground ladder #12 Performs steps at a fire ground pace Attack a simulated interior structure fire #1 Wears and uses appropriate PPE/SCBA/equipment at all times during evaluation Attack a simulated interior structure fire #2 Confirms order with company officer to deploy attack lines and enter structure for extinguishment purposes Attack a simulated interior structure fire #3 Places ladders correctly (if applicable) Attack a simulated interior structure fire #4 Conducts visual size-up of scene to identify hazards Attack a simulated interior structure fire #5 Deploys attack, places nozzle and 50 feet of working hose line near entry point Attack a simulated interior structure fire #6 Requests charging of line Attack a simulated interior structure fire #7 Goes on air Attack a simulated interior structure fire #8 Checks nozzle pressure and pattern and entry door Attack a simulated interior structure fire #9 Gains access and advances charged line into structure Attack a simulated interior structure fire #10 Maintains body posture appropriate for conditions Attack a simulated interior structure fire #11 Locates fire Attack a simulated interior structure fire #12 Operates charged line to suppress fire, uses effective water application practices, prevents water hammer Attack a simulated interior structure fire #13 Communicates with company officer the fire has been extinguished Attack a simulated interior structure fire #14 Checks for fire extension Attack a simulated interior structure fire #15 Exits structure with team member(s) and reports to company officer Attack a live interior structure fire #1 Wears and uses appropriate PPE/SCBA/equipment at all times during evaluation Attack a live interior structure fire #2 Confirms order with company officer to deploy attack line and enter structure for extinguishment purposes