100% Zufriedenheitsgarantie Sofort verfügbar nach Zahlung Sowohl online als auch als PDF Du bist an nichts gebunden
logo-home
SAN3701 (Structural Analysis IV) Project Solutions 2024 16,02 €
In den Einkaufswagen

Prüfung

SAN3701 (Structural Analysis IV) Project Solutions 2024

 15 mal verkauft
  • Kurs
  • Hochschule

Distinction Guaranteed (Excel programs are available)

vorschau 6 aus 28   Seiten

  • 30. juni 2024
  • 28
  • 2023/2024
  • Prüfung
  • Fragen & Antworten
avatar-seller
Structural Analysis IV

Project Solutions

2024




0027 65 934 4052

,TABLE OF CONTENTS



1.0 INTRODUCTION .......................................................................................................... 3

2.0 SCOPE OF THE PROJECT ........................................................................................... 3

3.0 ANALYSIS OF STRUCTURAL ELEMENTS AND RESULTS ................................. 6

,1.0 INTRODUCTION
Structural analysis and design is important as it focuses on the critical parts that need special
attention. Loads act on a structure in different directions. In structural design, worst case
loading conditions which result into the highest stresses are used to analyse a structure. Parts
of the structure that experience high Von –Mises stress or high buckling are isolated for further
analysis.

Engineering principles mainly used in this analysis derives knowledge from the following
topics:

 Statics
 Strength of materials
 Machine elements
 Material selection



2.0 SCOPE OF THE PROJECT
The project focuses on structural analysis of various structural elements using relevant
software tools and engineering principles. The following questions will be answered:

,
,
, 3.0 ANALYSIS OF STRUCTURAL ELEMENTS AND RESULTS


A1


Damping factor calculations
Load from the fluid9.8 kN
Height of wall 22.5 m
Tank diameter 100 m
Thickness of wall 0.8 m
Poisson's ratio 0
finite beam



ANALYSIS FOR FINITE BEAM CASE


Step 1

Calculations for µ
µ= 0.20808957
µL= 4.68201538

Step 2

Based on the boundary conditions at x = 0, the bending moment M = 0 and the equation 5.5 SG can be simplified to (A1-B1=0).
This is equation 01 for the matrix formation

Based on the boundary conditions at x = 0, the shear force V = 0 and the equation 5.6 SG can be simplified to (-A1-A2-B1+B2=0).
This is equation 02 for the matrix formation

From equation 5.3 SG the deflection distribution is given. It can be calculated from the coefficients for A1, A2, B1, and B2. These
coefficients will form part of the equation 03 for the matrix formation .

Calculation for coefficient equation 03

Coefficient A1= -0.00925606
Coefficient A2= -0.00028123 4E µ^4v-q= -220.5
Coefficient B1= -107.93768101
Coefficient B2= -3.27946438

From equation 5.4 SG the slope distribution is given. It can be calculated from the coefficients for A1, A2, B1, and B2. These
coefficients will form part of the equation 04 for the matrix formation.

Calculation for coefficient equation 04

Coefficient A1= 0.0089748343
Coefficient A2= 0.0095372871 4EI µ^3(dq/dx)-1/µ(dq/dx)= -47.09510372
Coefficient B1= -111.2171453858
Coefficient B2= 104.6582166307

Alle Vorteile der Zusammenfassungen von Stuvia auf einen Blick:

Garantiert gute Qualität durch Reviews

Garantiert gute Qualität durch Reviews

Stuvia Verkäufer haben mehr als 700.000 Zusammenfassungen beurteilt. Deshalb weißt du dass du das beste Dokument kaufst.

Schnell und einfach kaufen

Schnell und einfach kaufen

Man bezahlt schnell und einfach mit iDeal, Kreditkarte oder Stuvia-Kredit für die Zusammenfassungen. Man braucht keine Mitgliedschaft.

Konzentration auf den Kern der Sache

Konzentration auf den Kern der Sache

Deine Mitstudenten schreiben die Zusammenfassungen. Deshalb enthalten die Zusammenfassungen immer aktuelle, zuverlässige und up-to-date Informationen. Damit kommst du schnell zum Kern der Sache.

Häufig gestellte Fragen

Was bekomme ich, wenn ich dieses Dokument kaufe?

Du erhältst eine PDF-Datei, die sofort nach dem Kauf verfügbar ist. Das gekaufte Dokument ist jederzeit, überall und unbegrenzt über dein Profil zugänglich.

Zufriedenheitsgarantie: Wie funktioniert das?

Unsere Zufriedenheitsgarantie sorgt dafür, dass du immer eine Lernunterlage findest, die zu dir passt. Du füllst ein Formular aus und unser Kundendienstteam kümmert sich um den Rest.

Wem kaufe ich diese Zusammenfassung ab?

Stuvia ist ein Marktplatz, du kaufst dieses Dokument also nicht von uns, sondern vom Verkäufer TrustAcademy. Stuvia erleichtert die Zahlung an den Verkäufer.

Werde ich an ein Abonnement gebunden sein?

Nein, du kaufst diese Zusammenfassung nur für 16,02 €. Du bist nach deinem Kauf an nichts gebunden.

Kann man Stuvia trauen?

4.6 Sterne auf Google & Trustpilot (+1000 reviews)

45.681 Zusammenfassungen wurden in den letzten 30 Tagen verkauft

Gegründet 2010, seit 15 Jahren die erste Adresse für Zusammenfassungen

Starte mit dem Verkauf
16,02 €  15x  verkauft
  • (0)
In den Einkaufswagen
Hinzugefügt