Garantie de satisfaction à 100% Disponible immédiatement après paiement En ligne et en PDF Tu n'es attaché à rien
Recherché précédemment par vous
Summary Unit 6 case study.doc MOS 5101 SAFETY AND ACCIDENT PREVENTION Case Study MOS 5101-18N-SU21L-S1 Master of Science Occupational Safety & Health Hoeganaes Corporation: Gallatin, TN Hoeganaes Corporation is a producer of atomized $7.49
Ajouter au panier
Summary Unit 6 case study.doc MOS 5101 SAFETY AND ACCIDENT PREVENTION Case Study MOS 5101-18N-SU21L-S1 Master of Science Occupational Safety & Health Hoeganaes Corporation: Gallatin, TN Hoeganaes Corporation is a producer of atomized
7 vues 0 fois vendu
Cours
Csu
Établissement
Columbia Southern University
Unit 6 case MOS 5101 SAFETY AND ACCIDENT PREVENTION Case Study MOS 5101-18N-SU21L-S1 Master of Science Occupational Safety & Health Hoeganaes Corporation: Gallatin, TN Hoeganaes Corporation is a producer of atomized steel and iron powders and is a subsidiary of GKN. Th...
unit 6 case studydoc mos 5101 safety and accident prevention case study mos 5101 18n su21l s1 master of science occupational safety amp health hoeganaes corporation gal
École, étude et sujet
Columbia Southern University
Csu
Tous les documents sur ce sujet (454)
Vendeur
S'abonner
helperatsof1
Avis reçus
Aperçu du contenu
MOS 5101
SAFETY AND ACCIDENT PREVENTION
Case Study
MOS 5101-18N-SU21L-S1
Master of Science Occupational Safety & Health
Hoeganaes Corporation: Gallatin,
TN
Hoeganaes Corporation is a producer of atomized steel and iron powders and is a
subsidiary of GKN. The Hoeganaes Corporation facility where the incidents occurred
employs a workforce of about 200 and has a manufacturing capacity of 300,000 tons
of powdered metal that are used by various industries in the world.
Work
Process
The Hoeganaes facility receives and melts scrap steel. Various elements are added to the
molten metal according to customer’s requirements and when cooled, the molten metal
is milled into coarse powder that is then processed in annealing furnaces to make the
metal more ductile. During the process, hydrogen is provided in the furnace to remove
oxides in the metal to prevent oxidation. The hydrogen is supplied by an on-site
contractor through pipes located in a trench under the floor and covered by metal plates.
The coarse powder
is then processed into a thick sheet and sent to a breaker to be crushed into the
finished product, powdered metal.
Incident
s
, There were three notable incidents that occurred within five months of 2011 that
resulted in a total of five fatalities and three injuries to the employee. From the study of
the incidents, a risk assessment of the fire hazard is performed using the Risk Matrix
metal dust accumulation
2 Poor maintenance regime Fire, explosion due 5 4 20
resulting in leaking of hydrogen to introduction of
gas in pipe trench heat source
From the risk assessment performed, the main causes of the three incidents can be
attributed to poor housekeeping and lack of proper maintenance regime/schedule. As
read in the investigation report by CSB, the first two incidents occurred due to an
accumulation of combustible metal dust in the surrounding area of the incidents and
when the employees of Hoeganaes went to conduct repairs and maintenance, the dust
was disturbed and spread through the atmosphere which resulted in a fire when the dust
came in contact with air and heat. The third incident was a result of a lack of
maintenance regime and instructions to mitigate leaks of gases from the pipe trench.
There was no written procedure for the team to mitigate the risk of investigating and
repairing damage of pipe in the trench and this resulted in them doing what they thought
was right and it resulted in a disaster for the team.
Applicable OSHA Standards
From the case study report, the applicable OSHA standards I believe can be applied to
the hazards are firstly, Section 5(a)(1) of the OSH Act (https://www.osha.gov/laws-
Les avantages d'acheter des résumés chez Stuvia:
Qualité garantie par les avis des clients
Les clients de Stuvia ont évalués plus de 700 000 résumés. C'est comme ça que vous savez que vous achetez les meilleurs documents.
L’achat facile et rapide
Vous pouvez payer rapidement avec iDeal, carte de crédit ou Stuvia-crédit pour les résumés. Il n'y a pas d'adhésion nécessaire.
Focus sur l’essentiel
Vos camarades écrivent eux-mêmes les notes d’étude, c’est pourquoi les documents sont toujours fiables et à jour. Cela garantit que vous arrivez rapidement au coeur du matériel.
Foire aux questions
Qu'est-ce que j'obtiens en achetant ce document ?
Vous obtenez un PDF, disponible immédiatement après votre achat. Le document acheté est accessible à tout moment, n'importe où et indéfiniment via votre profil.
Garantie de remboursement : comment ça marche ?
Notre garantie de satisfaction garantit que vous trouverez toujours un document d'étude qui vous convient. Vous remplissez un formulaire et notre équipe du service client s'occupe du reste.
Auprès de qui est-ce que j'achète ce résumé ?
Stuvia est une place de marché. Alors, vous n'achetez donc pas ce document chez nous, mais auprès du vendeur helperatsof1. Stuvia facilite les paiements au vendeur.
Est-ce que j'aurai un abonnement?
Non, vous n'achetez ce résumé que pour $7.49. Vous n'êtes lié à rien après votre achat.
