100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
BTEC APPLIED SCIENCE: UNIT 2 - Learning Aim A $9.08   Add to cart

Essay

BTEC APPLIED SCIENCE: UNIT 2 - Learning Aim A

1 review
 538 views  9 purchases
  • Course
  • Institution

Undertake titration and colorimetry to determine the concentration of solutions. At grade Distinction. It includes results graphs and calculations.

Last document update: 2 year ago

Preview 2 out of 11  pages

  • March 21, 2022
  • March 21, 2022
  • 11
  • 2020/2021
  • Essay
  • Unknown
  • A+

1  review

review-writer-avatar

By: saabghuman004 • 1 year ago

avatar-seller
Unit 2: Practical Scientific Procedures and Techniques. Learning aim A: Undertake
titration and colorimetry to determine the concentration of solution


Index
 Introduction,
 Risk Assessment,
 Equipment Needed,
 Calibration,
 Method (For Both),
 Results (For Both),
 Graphs (For Both),
 Calculations.
 Conclusion (For Both)
 Evaluation (For Both)

Introduction

This report will show how to determine the concentration of a solution using Titration and Colorimetry.
Demonstrated below is the correct preparation and standardising of solutions for titration and
colorimetry, an investigation into the concentration of unknown solutions using procedures and
techniques in titration and colorimetry, a demonstration of skilful application of procedures and
techniques and evaluated accuracy of procedures and techniques used in titration and colorimetry in
relation to the outcomes and to suggest improvements.



Titration of Sodium Carbonate solution and unknown concentration of Hydrochloric
Acid.


Risk Assessment

 Hydrochloric acid - Corrosive,
 Sodium Hydroxide - Corrosive,
 Indicator - Flammable,
 Sodium Carbonate – Irritant,
 Glassware – Breakages.

In the experiment you will use Corrosive and harmful chemicals, Flammable substances and
Glassware. To reduce the risk of harming yourself and others, in the event of any spillages or
breakages you should clean them up immediately and put any pieces of broken glass in the bin. You
should also limit skin to skin contact with the hazardous substances and use gloves where and if
needed, Have no open flames when using the indicator, be very careful when using the glassware
and chemicals and lastly have a window open at all times to create ventilation to prevent yourself or
anyone else from breathing in strong amounts of the irritant.



Equipment needed:

1

,  1M Hydrochloric acid – Corrosive,
 Sodium carbonate – Irritant,
 Phenoplhalein (indicator) – Flammable,
 Sodium hydroxide – Corrosive,
 Balance,
 Spatula,
 Deionised Water,
 Volumetric flask,
 Burette,
 Funnel,
 Pipette filler,
 Pipette,
 Conical flask,
 Beaker,
 pH meter,
 Clamp,
 Stand.

Calibration (For both)

Calibration is important as it ensures that the equipment you are using is more accurate and the result
that you receive will give a more precise outcome. The equipment that you need to calibrate for both
experiments is the Balance, pH meter, Pipette and the Colorimeter. To calibrate the balance you can
use set weights to see if the reading matches the actual weight of the objects, or weigh the substance
you are using multiple times to ensure you receive the same reading. To calibrate the pH meter you
leave it in shallow water for roughly 60 seconds to make sure that the reading is a pH of 7. Thirdly to
calibrate the Pipette you run deionised water through it to make sure that it is clean and practice filling
and emptying the pipette filler. Lastly to calibrate the colorimeter insert a cuvette filled with deionised
water into the cuvette holder, and test it.

Method (Titration)

Step 1. Calibrate all the equipment necessary as shown above,

Step 2. Weigh out 0.25-0.30g of sodium carbonate into a dish,

Step 3. Fill a beaker with 100ml of deionised water, then dissolve the sodium carbonate in the water.
When it has all dissolved put the solution into a 250cm volumetric flask using the funnel,

Step 4. Once the sodium carbonate solution is in the volumetric flask fill it with deionised water up to
the mark and gently swirl it to make sure that all of the substance is dissolved,




2

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Jessicajohnsonn. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $9.08. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75632 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$9.08  9x  sold
  • (1)
  Add to cart