ISYE 6501 FINAL QUIZ 1:
GT STUDENTS &
VERIFIED EXAM
SOLUTION GEORGIA
INSTITUTE OF
TECHNOLOGY
,3/3/202 GT Students and Verified | Midterm Quiz 1 | ISYE6501x
0 Courseware | edX
Cours
Midter… Midter… GT Stu…
e
GT Students and Veried
View the Proctoring System Requirements to ensure that your set-up will work.
Note that proctoring is only supported on MacOS and Windows machines. We
recommend 2 GB of free space on your machine, and a functioning Webcam is
required. Your space should be clean, no writing visible on walls or surfaces,
and you should be alone in the room. Please make sure that you have veried
your ID before taking the exam.
95 Minute Time Limit
Instructions
Work alone. Do not collaborate with or copy from
anyone else. You may use any of the following
resources:
One sheet (both sides) of handwritten (not photocopied or scanned) notes
If any question seems ambiguous, use the most reasonable interpretation
(i.e. don't be like Calvin):
…
,3 3/2020 GT Students and Verified | Midterm Quiz 1 | ISYE6501x Courseware | edX
/
Good Luck!
Question 0 -- Practice with Drag & Drop
0 points possible (ungraded)
Keyboard Help
Some of the quiz questions are Drag-and-Drop. You'll need to drag one or
more answers to a location.
Some answers might not be used at all, and some answers will be used once. To
get full credit you
might need to drag more than one answer to some locations, just one answer
to other locations, and some locations might not have any correct answers.
Please do this quick practice question. The question will give you feedback to
make sure you've done it correctly, but the real quiz questions will not.
x=1,y=7
x=2,y=3 x=1,y=4
, 3 3/2020 GT Students and Verified | Midterm Quiz 1 | ISYE6501x Courseware | edX
/
x=1,y=6
Subm You have used 1 of 10 attempts.
it
Rese Show
t Answer
FEEDBACK
□ Correctly placed 3 items.
□ Good work! You have completed this drag and drop problem. Note that: (1) There are
two places you could've put (x=2,y=3); either one would be correct. (2) One location
(x+y=2) had nothing dragged to it. Another location had two answers dragged to it. (3)
One choice (x=1,y=7) was not dragged anywhere, since it wasn't correct for anything.
Question 1
9/13 points (graded)
Keyboard Help
Drag each of the 13 models/methods to one of the 5 categories of question it is
commonly used for, unless no correct category is listed for it. For
models/methods that have more than one correct category, choose any one
correct category; for models/methods that have no correct category listed, do
not drag them.
Principal
component
analysis
GT STUDENTS &
VERIFIED EXAM
SOLUTION GEORGIA
INSTITUTE OF
TECHNOLOGY
,3/3/202 GT Students and Verified | Midterm Quiz 1 | ISYE6501x
0 Courseware | edX
Cours
Midter… Midter… GT Stu…
e
GT Students and Veried
View the Proctoring System Requirements to ensure that your set-up will work.
Note that proctoring is only supported on MacOS and Windows machines. We
recommend 2 GB of free space on your machine, and a functioning Webcam is
required. Your space should be clean, no writing visible on walls or surfaces,
and you should be alone in the room. Please make sure that you have veried
your ID before taking the exam.
95 Minute Time Limit
Instructions
Work alone. Do not collaborate with or copy from
anyone else. You may use any of the following
resources:
One sheet (both sides) of handwritten (not photocopied or scanned) notes
If any question seems ambiguous, use the most reasonable interpretation
(i.e. don't be like Calvin):
…
,3 3/2020 GT Students and Verified | Midterm Quiz 1 | ISYE6501x Courseware | edX
/
Good Luck!
Question 0 -- Practice with Drag & Drop
0 points possible (ungraded)
Keyboard Help
Some of the quiz questions are Drag-and-Drop. You'll need to drag one or
more answers to a location.
Some answers might not be used at all, and some answers will be used once. To
get full credit you
might need to drag more than one answer to some locations, just one answer
to other locations, and some locations might not have any correct answers.
Please do this quick practice question. The question will give you feedback to
make sure you've done it correctly, but the real quiz questions will not.
x=1,y=7
x=2,y=3 x=1,y=4
, 3 3/2020 GT Students and Verified | Midterm Quiz 1 | ISYE6501x Courseware | edX
/
x=1,y=6
Subm You have used 1 of 10 attempts.
it
Rese Show
t Answer
FEEDBACK
□ Correctly placed 3 items.
□ Good work! You have completed this drag and drop problem. Note that: (1) There are
two places you could've put (x=2,y=3); either one would be correct. (2) One location
(x+y=2) had nothing dragged to it. Another location had two answers dragged to it. (3)
One choice (x=1,y=7) was not dragged anywhere, since it wasn't correct for anything.
Question 1
9/13 points (graded)
Keyboard Help
Drag each of the 13 models/methods to one of the 5 categories of question it is
commonly used for, unless no correct category is listed for it. For
models/methods that have more than one correct category, choose any one
correct category; for models/methods that have no correct category listed, do
not drag them.
Principal
component
analysis
