B.P3 Produce an IoT system or device design to solve a problem, including the architecture, standards, communication requirements and security.
B.P4 Review the IoT system or device design with others to identify and inform improvements.
C.P5 Develop a prototype IoT system or device with partial...
unit 19 the internet of things and how can it be used
unit 19 internet of things assignment 2
unit 19 the internet of things and how can it be used assignment 2
u19 the internet of things and how can
Written for
BTEC
PEARSON (PEARSON)
Computing
Unit 19 The Internet of Things
All documents for this subject (3)
1
review
By: abhlm • 1 year ago
Seller
Follow
jhanleyyap
Reviews received
Content preview
U19 Assignment 2 – Internet of Things
Table of Contents
Introduction............................................................................................................................1
Problem..................................................................................................................................1
Design.....................................................................................................................................2
Architecture............................................................................................................................3
Standards................................................................................................................................7
Communication Requirements.................................................................................................7
Security.................................................................................................................................10
Feedback...............................................................................................................................11
Improvement Optimisation...................................................................................................13
Implementation Future Review.............................................................................................14
Obviously following the design development of the IoT device, and as previously stated, we
are currently unable to put this IoT device into full fruition. However, following the design,
and all its improvements we can take this design and look to deploy it into its industry........14
Justification + Evaluation Review...........................................................................................15
References.............................................................................................................................17
Introduction
Following the initial research, I undertook researching into the internet of things
sector, and analysing the different sectors this technology is deployed into, I have
further been requested to analyse this sector into more detail and come up with an
IoT solution that can be deployed within the company.
I have decided to take this position on board, and hope to provide a scalable,
suitable IoT device that can tackle the current issues within the security sector that
the company are facing.
Moreover, through providing this solution, it will hopefully aid the company in the
future deployments of their products for their consumers.
Problem
Using this initial research of the home sector and transportation sector, I have
decided to opt for a home sector oriented IoT device. Although I did find the
transportation sector to have more variety and excitement in the area of IoT, I
, believe that the home sector could do with some adjustments and innovation in the
development of their IoT devices.
So, in turn of this, I will be designing and looking to implement an IoT device that
can actively monitor a situation, whilst being biometrically robust in protecting any
outside interference such as potential thieves or those looking to vandalise
property. This will solve the problem that many encounter when trying to protect
their valuables in this high crime rate world we currently live in.
This device is likely to come in the form of a biometric lock, that can be remotely
operated and serves its main purposes through the application that will be
developed, allowing individuals to actively monitor a situation taking place. This
device is also likely to pinpoint GPS locations, so an individual can have these
devices in multiple locations, even in some moving vehicles or devices, and still
actively monitor the location of their device.
Design
To provide a decent baseline in which we can build our IoT device off, I will be
designing an IoT device that can be deployed into the intended sector. Through
implementing a design phase in which we must follow, it will allow us to visualise
the final product that will be released to the public, whilst also gaining feedback off
these designs to inform improvements we can make in the development of this IoT
device’s design.
‘Airtag’ to provide NFC communication The central company database that will
to the smart lock, provided as a backup The consumer side of the smart lock store
is the the
application in which
data learned over time from
option to the application. we provide to access and control thethe smart locklocking
smart from asystem
remoteand look to
standpoint. This application allows this exactly
inform to happen and
improvements is
through its
Provides the core centre for energy to installable from the application store,machine
so therelearning
are no extra
techniques.
the smart lock and allows the smart steps needed to install this application.
lock to make use of its functionality. Raspberry PI board that will compute
Alternate measure is to connect to The application allows for multiple smart
next locks
to all to
theappear withincollected
information
main source of power in the event of a the interface and allows the individual to manually
from the smartcontrol the camera,
locks in-built
power cut or natural disaster. status of these locks through an easyand
slider mechanism,
then release thisanddata to the
these smart locks can simultaneouslydatabase
be activated at one
for the relevant machine
Siren that alerts emergency services if location and deactivated at another. learning to take place and ultimately
the in-built timer goes over three boost improvements to these devices
minutes, also sets of flashing lights to As the security company are likely tooverwanttime.
to implement a
try and stray the intruder away from solution that can have multiple use cases, I have also decided to
the smart lock. implement a functional button
To allow that allows
this device to bean individual
useful to
in deployment in multiple
simultaneously lock or unlock
scenarios, the to
I had entire smart locking
implement system This was to
a microphone.
Actuation wheel to access the The original door hinge
as one in the caseallow
of emergency or accidentally not locking
for the ability of two-way communication between
facility after valid method of that is used forthese
activation
devices whentheintended.
device owner and whoever is using the IoT device at
entry is recognised, is turned like of the door manually but the given time. This really increases the chance that this
an ordinary locking system. This won’t be operation under IoT device can be deployed on a larger, more international
removes the need for a huge the new smart lock. scale within the company, as it changes generally what a
transition over to this IoT device. smart lock is capable of.
, I personally believe to have produced a design that successfully meets the clients’
requirements listed in the brief originally handed to me. This device solves the
serious issue that current companies have with security, and the simple
misplacement of a traditional key, can lead to an entire company’s security to be
jeopardized.
Moreover, we have not only provided a solution to the current issue that many
major companies are facing, but also provided a simple, intuitive application that
these companies can use to simple control these IoT devices, even from a remote
location.
Finally, to entangle this whole IoT solution together, the smart lock will be written
in C++. This is down to the fact that this programming language is readable by the
Raspberry PI board and that this language can communicate components of the IoT
device to the main board in an efficient manner. In addition to this, this language is
extremely powerful and can also communicate the data processed by the Raspberry
PI through the internet connection provided by the host and send the necessary
data off to the database situated in the company where needed machine learning
can take place.
Architecture
In essence, the architecture is the other factors of an IoT device that make it into
the device it is to function in the way that it can. Examples of these types of
architectural differences are sensors, cloud services, layers and many more.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller jhanleyyap. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.82. You're not tied to anything after your purchase.
