OSHA Final Exam with 100% Correct Answers 2022-23

OSHA's mission is to - Correct answer-Protect the safety and health of america's workers The creation of OSHA provided this important right to workers - Correct answer-the right to a safe and healthful workplace The OSHA standards for contruction and general industry are also known as: - Correct answer-Part 1926 and part 1910 if you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which is your best option? - Correct answer-submit a written, signed complaint with specific hazard information The right of workers to seek safety and health on the job without fear of punishment is spelled out in - Correct answer-section 11(c) of the OSH act MSDS sheets give info about - Correct answer-hazardous chemicals Osha requires that employers pay for most required PPE including: - Correct answerHard Hats one of the ain responsibilities employers have under OSHA is to: - Correct answerprovide training required by OSHA standards What type of OSHA inspection is conducted when immediate death or serious harm is likely? - Correct answer-imminent danger when the emplyer receives an OSHA citation, it must be - Correct answer-posted for 3 days or until the violation is fixed during an osha inspection - Correct answer-you have the right t talk to the inspector privately among the rights related to osha recordkeeping, workers have the right to review - Correct answer-the osha 300 log and teh OSHA 300A summary The abatement date is the date to - Correct answer-correct violation within 10 calendar days after _______, the employer must certify to OSHS that each cited violation has been abated - Correct answer-abatement date advance notice of inspection is always given to the employer - Correct answer-false each citation (one or more copies) should be posted for employees until a violation is abated for _________ working days - Correct answer-3 if the employer objects to the inspection, the Safety and Health officer will - Correct answer-terminate the inspection or continue the inspection in area where no objection is raised the employer must post a copy of each docment submitted to the agency or a summary of the document - Correct answer-in a place near where the violation occurred the employer must comply with an employee's or employee representative's request to examine and copy abatement documents within_______ working days of receiving the request - Correct answer-5 in cases of apparent imminent danger, advance notice of inspection - Correct answerwill be given which of the following will be given an opportunity to accompany the compliance safety and health officer during the physical inspection of any workplace for the purpose of aiding such inspection? - Correct answer-all of the above it is not necessary to implement safety and health programs in the workplace to reduce the likelihood of employee injury and added costs - Correct answer-false which of the folowing can be a result of not implementing a safety and health program into the workplace? - Correct answer-all of the above education and training in safety and health protection is especially critical for employees who are assuming new duties - Correct answer-true __________focuses on the relationship between the worker, the task, the tools and the work environment - Correct answer-job hazard analysis a question such as- is one person clearly responsible for the overall activities of the safety and health program?- should be part of the : - Correct answer-safety and health checklist if an employee receives a severe injury and loses his fingers and hands, this is an example of - Correct answer-the consequences of the hazard which of the following is implemented during a worksite analysis - Correct answer-all of the above management should believe that safety and health on the job is______organizational objectives, such as cost control, quality and productivity - Correct answer-as important as hazard information that is needed by employees includes - Correct answer-all of the above if all hazard controls are in place to eliminate or minimize the workplace and job hazards, the are no other safety measures that need to be taken. - Correct answerFalse it is not necessary to implement safety and health programs in the workplace to reduce the likelihood of employee injury and added costs - Correct answer-false which of the following can be a result of not implementing a safety and health program into the workplace? - Correct answer-all of the above education and training in safety and health protection is especially critical for employees who are assuming new duties - Correct answer-true _______ focuses on the relationship between the worker, the task, the tools and the work environment - Correct answer-job hazard analysis at what point do employers stop counting lost work days? - Correct answer-180 The osha annual summary must be posted the following calendar year between - Correct answer-Feb.1 and April 30 a case is work-related if an event or exposure in the work environment either caused or contributed to the resulting condition - Correct answer-true in a privacy concern case, the employer should write ____ in the name column - Correct answer-privacy case incidents involving at least one fatality or hospitalization of multiple workers must be reported to OSHA - Correct answer-within 8 hours which of the following is a recordable injury or illness? - Correct answer-all of the above in which of the following would a case be considered new? - Correct answer-the employee has not previously experienced a recorded injury/illness of the same type that affects the same part of the body the injury and illness incident report is reffered to as osha form - Correct answer-301 recording or reporting a work-related injury, illness or fatality does not mean that the employer or employee was at fault, that an osha rule has been violated or that the employee is eligible for workers' compensation or other benefits - Correct answer-true MSDS need only be accessible to employers and shift-leaders or foremen - Correct answer-false chemical evaluation canbe done by testing the mixture as a whole - Correct answer-true which of the following are common problems with employee training programs? - Correct answer-all of the above where employees must travel between workplaces during a workshift, i.e., theri work is carried out at more than one geographical location, the MSDS may be kept at the primary workplace facility - Correct answer-True which of the following is not a classification of chemical hazards? - Correct answerirritant a proper hazardous chemical label does not need to include - Correct answerinstructions for spillage cleanup when putting your hazard communication program into practice, you should identify resonsible staff and identify haardous chemicals before you begin implementing your program - Correct answer-true inhalation is most common method for chemicals to enter the body - Correct answertrue which of the following is not a condition that allows for the withholding of trade secrets? - Correct answer-the specific identity is made available to all employers which of the following employee identification information should a fire prevention plan contain - Correct answer-both a and b which of the following is a workplace where an exit door can be locked from the inside? - Correct answer-correctional facility an evacuation warden is a person employers can designate: - Correct answer-both a and b exits must be separated by ______ materials - Correct answer-fire resistant the emergency action plan must be in writing, except for firms with______ or fewer employees - Correct answer-10 exit routes must be ________ and there must be enough exits in the proper arrangement for quick escape - Correct answer-permanent an exit is permitted to only have openings necessary to allow access to the exit from occupied areas of the workplace or exit discharge - Correct answer-true a class c fire extinguisher is for - Correct answer-energized electrical equipment all exit route environments should be well lit so that an employee along the route - Correct answer-false contents which are liable to burn extremely fast or that can produce poisonous fumes or explosions in a fire are known as - Correct answer-high hazard contents which of the following persons is resonsible for fire detection systems being designed to operate in time to control or extinguish a fire? - Correct answer-both a and b in order to be fully operational, fire detectors need to be cleaned of - Correct answer-all of the abov the employer must post hazard warning or caution signs at the entrance to, and inside of, areas protected by fixed extinguishing systems which use agents in concentrations known to be hazardous to employee safety and health - Correct answer-true generally, it is important that the employer not delay alarms or devices initiated by fire detector actuation for more than: - Correct answer-30 seconds all standpipe systems installed before Jan. 1, 1981, for use by employees, must be equipped with the lined hose - Correct answer-false the employer must restore all fire detection systems and components to normal operating condidtion as promptly as possible________ each test or alarm - Correct answer-after Any defects or impairments of fixed extinguishing systems must be properly corrected by the employee - Correct answer-false all fire detection systems must be tested and adjusted_______ to maintain proper reliability and operating condition except that factory calibrated detectors need not be adjusted after installation - Correct answer-as often as needed hose systems must be inspected at least _________and after each use to assure that all of the equipment and hos are in place, available for use and in serviceable condition - Correct answer-annually the employer must ensure the use of ________needed for immediate rescue of employees trapped in hazardous atmospheres created by an agent discharge - Correct answer-PPE which of the following is not approved or suitable for use with flexible cords and cables? - Correct answer-none of the above if you come into contact with an energized black wire and you are also in contact with a white grounded wire - Correct answer-current will pass through you body and you will receive a shock in general, a disconnecting means must be located in sight from the controller location - Correct answer-true in general, a disconnecting means must be located in sight from the controller location - Correct answer-true overcurrent devices for circuits rated 600 volts nominal or less must be reaily accessible to each employee or authorized building management personnel - Correct answer-true all circuits breakers must clearly indicate whether they are in the open ___ or closed- ____ position - Correct answer-off,on workers in elevated locations who experience a shock can fall, resulting in serious injury or death - Correct answer-true an open conductor must have at least 18 feet of clearance above a public street - Correct answer-true dry skin has a fairly high resistance, but when moist, resistance drops radically, making it a ready conductor - Correct answer-true if metal covers are used for __________, they must be grounded - Correct answer-all of the above temporary wiring over 600 volts, nominal, may be used only during - Correct answer-all of the above non-power-limited fire protective signaling circuits and ______ cuircuits may occupy the same enclosure, cable, or raceway provided all conductors are insulated for maximum voltage of any conductor within the enclosure, cable or raceway - Correct answer-class 1 emergency circuit wiring must be kept entirely independent of all other wiring equipment - Correct answer-true if too many devices are plugged into a circuit, the current will heat the wires to a very high temperature which may cause a fire, this is known as a(n) - Correct answeroverload hazard _________labels must be attached on the equipment and be plainly visible even when doors are open or panels are removed from compartments containing voltages of over 250 volts AC or DC - Correct answer-danger AC systems supplying fixed and portable electric equipment within the cell line working zone need not be grounded - Correct answer-true qualified persons must, at a minimum, be trained in and familiar with the following - Correct answer-all of the above if work is to be performed near overhead lines, the lines must be __________or other protective measures must be provided before work is started - Correct answer-both a and c according to safe work practices for deenergizing equipment, each tag must contain a statement: - Correct answer-prohibiting unauthorized operation of the disconnecting means and removal of the tag conductors emerging from the ground must be enclosed in approved raceways - Correct answer-true a limit switch or other device must be provided to prevent the load block from passing the safe upper limit of travel of any hoisting mechanism - Correct answer-true The third step to controlling a hazard when handling spills or leaks is - Correct answercontain the material the ____ the flash point, the _____the hazard - Correct answer-lower, greater when vapors of a flammable or combustible liquid are mixed with air in the proper proportions in the presence of a source of ignition, rapid combustion or an explosion can occur - Correct answer-true which of the following is prohibited to use for storage of a flammable or combustible liquid? - Correct answer-open metal container inside a storage cabinent portable fire extinguishment and control equipment must be provided - Correct answerin such quantities and types as are needed for the special hazards of operation and storage transferring flammable liquids by mean of air pressure on the container or portable tanks is acceptable - Correct answer-false