ASE (Entry level technician prep) - Brakes A5
A5 Question 1
The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be:
A) Binding pedal linkage.
B)Dented brake line.
C)Plugged compensating port.
D)A ...
ase entry level technician prep brakes a5 a5 question 1 the brake pedal is low and spongy all brake adjustments have been completed according to specifications the cause of the problem could b
The brake pedal is low and spongy; all brake adjustments have been completed according to
specifications. The cause of the problem could be:
A) Binding pedal linkage.
B)Dented brake line.
C)Plugged compensating port.
D)A weak hydraulic hose.
Answer D is correct! Binding pedal linkage would cause a hard pedal and perhaps an effective brake
system. This is also true for a dented brake line. A plugged compensator port may cause dragging
brakes. A weak hydraulic brake hose could cause a spongy pedal. As the pressure builds in the system,
the hose may expand and not relay the pressure to the brake units.
Quiz:A5 Question 2
A vehicle has no brake pedal free play. This problem may cause:
A) a low brake pedal.
B)pressure build-up and dragging brakes.
C)a spongy brake pedal.
D)fluid leaking past the primary piston cups.
Answer B is correct! Without some free play, the brakes may not fully unapply and may cause brake
dragging.
Quiz:A5 Question 3
There are signs of paint removal and peeling on the power brake booster right below the master
cylinder. The cause of this could be:
A) A leaking secondary cup on the primary piston.
, B)A defective diaphragm in the brake booster.
C)A leaking secondary cup on the second piston.
D)Fuel being drawn into the booster by the vacuum.
Answer A is correct! A leaking secondary cup on the primary piston could cause an external leak at the
master cylinder. Because brake fluid tends to destroy paint, the peeling paint could be a good indication
of a brake fluid leak.
Quiz:A5 Question 4
When removing the master cylinder, all of the following steps must be performed EXCEPT:
A) Relieve any vacuum boost pressure (if equipped with power brakes).
B)Plug the ends of the brake lines to prevent fluid loss.
C)Disconnect the float level sensor.
D)Drain the master cylinder.
Answer D is correct! All of the answer choices need to be completed prior to removing the master
cylinder. Draining the master cylinder of fluid is not something that must be done. If it is done thef luid is
removed only after the lines have been disconnected and capped. Fluid should not run out of the master
cylinder while it's being removed so it is easier to empty the cylinder on a bench.
Quiz:A5 Question 5
A vehicle pulls to the left during a brake application. The cause of the problem could be:
A)The right front brake linings are contaminated with grease.
B)The piston is seized in the right front brake caliper.
C)The master cylinder pistons are swollen from contaminated fluid.
D)The secondary compensating port is plugged in the master cylinder.
Answer B is correct! The direction a vehicle pulls toward during the application of brakes is the side of
the vehicle that has less braking power. If something on the right side were causing the brakes to drag or
grab, the vehicle would tend to pull to the side with less braking power on the left side.
1. A spongy brake pedal may be caused by:
a. ABS Diagnostic Trouble Code set
b. Frozen caliper piston
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LIXAN. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.89. You're not tied to anything after your purchase.
