ICC Masonry Exam 2023 (GUARANTEED A+)

Which of the following is the standard specification for loadbearing concrete masonry units? correct answers ASTM C 90; RCMCI 6th Edition, Section 2.2.1 Which of the following grout admixtures is used to obtain a high slump with reduced water? correct answers Super plasticizer; RCMCI 6th Edition, Section 2.11.6 Which of the following is the standard specification that autoclaved aerated concrete masonry units must conform to for the strength class specified in the contract documents? correct answers ASTM C 1386; CI 530; Part 2, Section 2.3E. IBC 2103.3 Grout intended for use in the construction of engineered and empirically designed masonry structures must comply with correct answers ASTM C 476; 2006 IBC 2103.12 The slump test for grout must be performed in accordance with correct answers ASTM C 1019; ASTM - C1019-03 In what condition are grout specimens to be tested? correct answers Damp; ASTM - 1019-03 When the prism test method is being utilized, how long must the prisms cure prior to being cut? correct answers 28; 2006 IBC 2105.3.1 After construction and grouting, masonry test prisms should not be disturbed or moved for a minimum of correct answers 48 hours; ASTM - C 1314, Section 5.10 When field sampling grout, the elapsed time between obtaining the first and final portions of the sample shall not be more than correct answers 15 minutes; ASTM - C1019, Section 7.2.1 If mortar compression tests are required, how many tests per day are to be taken for the three successive work days at the start of the job? correct answers 1; RCMCI 6th Edition, 3.2.4 Glass unit masonry shall not be laid at temperatures below correct answers 60 degrees F; 2006 IBC 2104.3.2.1 What is the maximum mean daily temperature permitted before newly constructed masonry must be fog sprayed during curing? correct answers 100 degrees F; 2006 IBC 2104.4.3 When the temperature is below 40 degrees F, newly constructed masonry must be covered with a weather resistant membrane for a minimum of correct answers 24 hours; 2006 IBC 2104.3.3.3 After initial mixing, when the ambient temperature exceeds 90