100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
NACE CIP 1 CBT Exam Questions and Answers (2022/2023) (Verified Answers) $10.99   Add to cart

Exam (elaborations)

NACE CIP 1 CBT Exam Questions and Answers (2022/2023) (Verified Answers)

 0 view  0 purchase
  • Course
  • Institution

NACE CIP 1 CBT Exam Questions and Answers (2022/2023) (Verified Answers)

Preview 3 out of 26  pages

  • March 8, 2023
  • 26
  • 2022/2023
  • Exam (elaborations)
  • Questions & answers
avatar-seller
NACE CIP 1 CBT Exam Questions

1. Dew point is the temperature at which: >>> condensation occurs.

2. You are the NACE Inspector on a tank lining project where a 50% solids
epoxy tank lining is being applied. After application of the 19 coat you
notice small blisters in some areas of the applied lining. Your FIRST
preferred course of action is to:: >>>Document the problem and advise
the Contractor and Owner's representative.

3. If a contractor is using a poorly maintained compressor to supply air
for abrasive blast cleaning and conventional airspray, the coating
inspector should perform a: >>>blotter test for the presence of oil and
water.

4. Upon arrival of coating materials, the inspector should: >>>observe and
docu- ment the amount of material and batch numbers.

5. Relative humidity is: >>>a measure of the amount of moisture in the
air compared to saturation level.

6. Galvanic corrosion occurs on which of the following substrates?: Metal

7. When applying Thermal Spray Coatings the specification is most likely
to reference:: >>>SSPC-CS 23.00/AWS C2.23/NACE No. 12

8. What is the minimum recommended distance away from an edge that an
inspector should take a measurement with a dial type magnetic pull off Dry


,Film Thickness(DFT) gauge?: >>>2.5 cm (1 inch)

9. Polymerization is the process of?: Monomers joining together.

10.An exposed area of the substrate or previous coat of a conductive
material, often caused by poor application technique is called::
Holiday

11.Checking is:: a fine crack in the surface of a coating that rarely
reaches the substrate.

12.Inspection documentation is important because:: Owners use the
docu- mentation for a variety of purposes.

13.An Inspectors personal log book should contain:: No comments
regarding the application team.

14.You have just received your NACE CIP Level 1 certification when you
are asked to supervise a team of uncertified field pipeline inspectors.Your
FIRST preferred course of action is to:: Review the NACE Attestation
prior to making a decision.

15.Good record can provide maintenance departments with detailed
infor- mation about ALL of the following EXCEPT:: How the item was
coated.






, 16.Non Conformance Reports are completed by the Inspector:: When
the Inspector and Contractor deem it to be significant non
conforming item.

17. The initial steel condition is important to the NACE Inspector because::
-
The Inspector may have to reject the steel.

18.The form of corrosion that has the largest potential for unexpected
cata- strophic failure is:: Galvanic Corrosion

19.What is used to determine compressed air cleanliness?: Profilometer

20.Osmotic blistering is most likely to occur as a result of:: Airless
spray application.

21.When performing tests for oil and grease using an ultra violet light,
the NACE Inspector should be aware that:: Synthetic oil or grease may
not be identified.

22. To achieve consistently accurate results with ALL alt test equipment:: -
wash your hands before sampling.

23.When holiday testing is required the Inspector is always required
to enforce what standard?: NACE SP 0188

24.If the specifier does not identify a restriction level in accordance
with SSPC PA 2, the default restriction level is:: Level 3

25.Fine cracks in the surface of a coating that rarely reach the substrate
are called:: Checking

26.It is good practice for the NACE Inspector to have instrument

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Labsolution. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $10.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77764 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling

Recently viewed by you


$10.99
  • (0)
  Add to cart