Tilt-Up Concrete Test new update 2023 answered 100%
2 views 0 purchase
Course
Concrete
Institution
Concrete
Tilt-Up Concrete Test new update 2023 answered 100%
List the five steps to a successful tilt-up project.
1. Design
2. Planning
3. Construction
4. Erection
5. Creating Finishes
Select three disadvantages of tilt-up construction
available space to cast panels
weight of panels on certain so...
tilt up concrete test new update 2023 answered 100 list the five steps to a successful tilt up project 1 design 2 planning 3 construction 4 erection 5 creating finishes select three disadvanta
Written for
Concrete
All documents for this subject (75)
Seller
Follow
magdamwikash23
Reviews received
Content preview
Tilt-Up Concrete Test new update 2023 answered 100%
List the five steps to a successful tilt-up project.
1. Design
2. Planning
3. Construction
4. Erection
5. Creating Finishes
Select three disadvantages of tilt-up construction
available space to cast panels
weight of panels on certain soils
availability of lifting equipment
temporary bracing during construction
Define tilt-up.
Tilt up concrete is the technique of site casting concrete wall panels on a horizontal
surface and then lifting or tilting them into place.
Who is known as the father of tilt-up?
Robert Aiken
Cold weather is defined as a period when the average daily temperature <5ºC (40ºF) for
3 successive days and the temperature stays <10ºC (50ºF) for more than ½ of any 24
hour period.
True
Concrete will freeze if the temperature falls below -4ºC (25ºF).
True
What temperature range within the concrete (from the surface to the center) should be
maintained to avoid cracking?
35ºF
Recommended concrete temperature at the time of placement of a concrete element
10-inches in thickness is _________.
55ºF
Concrete should be placed at the lowest practical slump.
True
What are F-Numbers (FF and FL)?
FF = Flatness : controls local surface bumpiness by limiting the magnitude of
successive 1 ft. slope changes.
FL = Levelness : limits differences in departures from design grade over distances of 10
ft. (measure of floor pitch)
F numbers are a standard of specification and measurement of the flatness and
levelness of concrete floors.
What was wrong with the old "straightedge" specs?
They were unrealistic, unscientific, and not repeatable to use. There was a
disagreement as to what they meant.
How are F-Numbers better than the straight edge method?
, Using F-numbers are better than the straight edge method because they are easier to
identify and manage the floors features for it to qualify as good.
What F-Number approximately equals 1/8th inch in 10 feet?
FF50 is about equal to 1/8" for 10'
What is difficult about meeting an FF 50?
Meeting an FF 50 of flatness is considered very flat or almost super flat meaning 1/8"
needs to be met every 10'
How are F-numbers measured?
Flatness is measured by the difference in slope over 2' and levelness is measured by
the difference in elevation by more than 10'
What is a Superflat floor?
Specified overall flatness = 60
Specified overall levelness = 40
What FF and FL number would you recommend for a tilt-up project (remember the slab-
on-grade is your forming surface for your panels)?
I would say either flat or very flat due to these slabs will be standing upright supporting
the structure. Therefore they need to be square and plumb. Additionally they are the
finishes on the outside as well so everything needs to look straight and flat.
grade
refers to a surface
sand bed
a casting surface intended to set larger aggregate or stones in a random pattern
resulting in uneven surfaces that would not otherwise be effective on a solid concrete
slab
slab-on-grade
a concrete slab cast on the ground surface
subgrade
the surface below a slab or below a base
base
a granular material placed directly below the slab
reinforced slab
a concrete slab containing either WWF, reinforcing bars, or fiber
How is the subgrade modulus determined?
It is determined by the soils engineer after performing a test at the site. The test
meaures the load required to compress a 30" diameter steel plate 0.05" into the soil
Subgrade modulus is __________________.
a measure of the resiliency or compressibility, of the soil.
an important characteristic for determining the soil's supporting value.
The modulus of rupture and subgrade modulus combined determine the required slab
thickness.
True
The modulus of rupture value varies with the compressive strength of the concrete.
True
Service loads (loads during the use of the building) of a warehouse building's slab-on-
grade rarely exceeds _______ psf.
500
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller magdamwikash23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
