Certified Playground Safety Inspector CPSI Sample Exam Questions Already Passed

Certified Playground Safety Inspector CPSI Sample Exam Questions Already Passed To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on a partially bounded opening 3. Which of the following is correct regarding the impact-attenuation of surfacing material Critical height must equal or exceed fall height 4. When evaluating the structural integrity of a support structure for a swing that appears to be failing, a CPSI should hire a licensed professional engineer to certify the integrity of the equipment 5. Manufacturers of playground equipment must: provide the manufacturer's identification of the equipment 6. The majority of injuries associated with playground equipment result from falls to the surface on which the equipment was located 7. An opening may present a common crush or shear hazard only if it grabs the 5/8" (16mm) dowel 8. The criteria for unitary surface materials includes meeting requirements of ASTM F1292 and F1487 9. Regarding playground safety signage, which of the following is correct Signage may not prevent accidents but may reduce liability 10. Which of the following factors is MOST important when determining the frequency of inspections of surfacing Type of surfacing and amount of use 11. When planning a playground for public use, the play equipment that is chosen must be appropriate for the age of intended users 12. A spring rocker with seat height of 26" is about to be installed adjacent to the side of a fully enclosed bucket swing set. The minimum distance required between the swing set and the rocker is 108" or 9' 13. The Site History File for a playground should contains a comprehensive inventory of all equipment, a parts list, maintenance, and inspection recommendations 14. What is the minimum use zone between a stand-alone climber and a standing-rocking/springing playground piece 156" or 13' 15. The _____ of each play structure shall provide clear and concise inspection instructions Manufacturer 16. Heights of guardrails and protective barriers are determined by which of the following characteristics of children Center of gravity 17. Which of the following is allowed on a public playground Swinging exercise rings less than 7" in length are approved for public playgrounds 18. A component on stationary equipment that fits within a projection gauge and extends beyond the face of the gauge is technically defined as a protrusion 19. According to the CPSC, which of the following statements is correct The use zone is the area under and around the equipment where protective surfacing is required 20. According to CPSC, good playground supervisors must understand all EXCEPT general playground design 21. Where is the best source for accessible design information DOJ 2010 ADA Standard for Accessible Design 22. How should the CPSI determine the impact attenuation of the poured-in-place safety surfacing when auditing a playground Verify the documentation from the manufacturer 23. In the case that a CPSI will be training co-workers. The initial goal of the staff training should be to ensure awareness of playground safety 24. What is the most serious type of injury that can occur from a play component projection entanglement 25. Which of the following covers selecting and specifying surface systems under and around playground equipment ASTM F2223 26. It is the responsibility of the ______ to replace signs or labels or both, should they become illegible, destroyed, or removed Owner/Operator 27. Upon doing a routing inspection, a maintenance worker finds a badly cracked child's swing seat. There is no other seat available. The maintenance worker should remove the swing seat and chains 28. The ADA requires that accessible equipment on new or renovated playgrounds must be on an accessible route 29. Which of the following is exempt from the head entrapment requirements The opening between the surface and the first rung 30. When evaluating a site for it's potential as an appropriate site for future playground, all of the following should be considered EXCEPT proximity to the closest existing public playground with similar design 31. Which areas on a playground using loose fill surfacing are more susceptible to displacement Under swings and slide exits 32. The purpose of installing and maintaining an appropriate amount or type of impact attenuating surfacing under and around play equipment is to minimize the likelihood of a serious head injury 33. Which of the following is compliant with ASTM F1487 An accessible bolt end projecting two full threads beyond the face of a nut exposed on a guardrail is acceptable 34. The standard that is used to determine whether the playground surfacing is firm, stable, and slip resistant is F1951 35. The standards of the CPSI Code of Professional Conduct include all of the following EXCEPT Protecting the assets of the playground owner as a paramount objective 36. The guiding philosophy of risk reduction is to be proactive rather than reactive 37. Which of the following pieces of equipment is for children ages 2 to 5 72" high slide 38. The CPSC Handbook is a federal guideline 39. Which of the following statements is correct regarding guardrail design Horizontal infill cross-pieces should be spaced no farther than 3.5" apart 40. A CPSI conducts an audit of a public playground without the authorization or consent of the playground's owner The CPSI has violated the CPSC Code of Professional Conduct 41. Which option is best when a piece of playground equipment must be taken out of service for an extended period of time Place heavy duty construction fencing around the component and place signage in the area 42. Which of the following statements about playground inspections is true High frequency inspections should focus on routine maintenance 43. Which of the following has the greatest potential to create a Priority 1 hazard on a 120" long embankment slide A slide chute clearance zone less than 15" has greatest potential 44. When evaluating non-traditional playground equipment for hazards it is recommended that All components are identified and the appropriate performance requirements be applied 45. The determination of what constitutes a playground hazard according to the ASTM Standards and CPSC Guidelines is derived from all of the following EXCEPT IPEMA International Playground Equipment Manufacturer's Association 46. A child sustains a serious head injury at a playground. The Playground owner has performed regular safety inspections but has not documented the inspections or any corrective actions taken. The owner is now subject to possible accusations of Negligence 47. Which of the following is covered by ASTM F1487 Public use playground equipment 48. Low frequency inspection forms should be assembled using information from the Site History File and Mannufacturer's recommendations 49. Which of the following statements regarding fasteners and other hardware is true Must be corrosion resistant or have a corrosion 50. The fall height for an elevated platform is determined by measuring the height of the platform above the protective surfacing 51. Children ages 2 to 5 are most likely to have trouble with climbers that don't have an easy way down 52. Which of the following is an acceptable distance for the opening between two adjacent platforms 3" 53. A tot swing with fully enclosed seats has a top beam height of 96" above the protective surfacing, a pivot point of 6" below the top of the beam and a swing seat 24" above the ground what is the minimum use zone 132" or 11' 54. When installing climbing ropes over engineered wood fiber, the rope should be secured at both ends 55. What establishes the public playground owner's standard of care for their risk management program The owner's safety policy 56. According to CPSC, the quality of supervision depends upon the extent of the supervisor's knowledge of safe play behavior 57. A sitting spring rocker with a fall height of 28" is placed next to a large composite structure with a fall height of 72" What is the minimum acceptable distance between the spring rocker and composite structure 108" or 9' 58. Which of the following is the most important factor when determining placement of play equipment for 2 to 5 year olds Circulation of users 59. What is the purpose of a playground safety audit Record compliance with current guidelines and standards 60. Which of the following is a hazard associated with track rides when the rolling portions of the hand gripping is not enclosed Crush and shear points 61. Which of the following will BEST protect against litigation related to playground safety Maintaining play areas in compliance with ASTM standards 62. The CPSC recommends that children of which age group use Horizontal ladders, ring treks and chinning bars 4 years of age and older 63. Stepping forms for pre-school age children must be permanently affixed and shall have a hand support if the step is greater than 20 inches 64. A CPSI Audits a new playground designed for children 2 to 5 and documents all compliant and non-compliant conditions found. Which of the following is non-compliant A platform used to access a track ride that is 38" by 36" 65. According to the current CPSC Handbook, fatal injuries of children involving playground equipment include which of the following Impact from equipment tipping over 66. For which of the following has the fall height as the maximum height of the structure The fall height for horizontal ladders is the maximum height of the structure 67. Trees can be utilized for sun protection if the trunks are located outside the use zone 68. What is the minimum use zone between a stand-alone climber and a standing-rocking/springing playground piece 156" or 13' 69. Which of the following statements regarding swings is true Swings require bushings, bearings, or other means of reducing friction and wear 70. What is the minimum use zone between a merry-go-round and sitting-rocking/springing equipment 144" or 12' 71. If fencing is installed on a playground, the fencing shall comply with ASTM 2049 72. Playgrounds made of wood or containing wood components must be naturally rot resistant or treated to resist rot 73. When performing a safety audit, a 5/8" diameter rod is used to check for crush or shear hazards on a moving component 74. All of the following are factors identified to contribute to playground injuries EXCEPT equipment designed to encourage risk taking