WLD 112 final exam questions and answers 2023 with complete solution
1 view 0 purchase
Course
WLD 112
Institution
WLD 112
WLD 112 final exam questions and answers 2023 with complete solution
The V-shaped head attachment of a combination square can be used to
locate the center of shafts or other round objects
The tool uses a bubble in a glass vial to check level and plumb is a
level
Internal misalignment between...
wld 112 final exam questions and answers 2023 with complete solution the v shaped head attachment of a combination square can be used to locate the center of shafts or other round objects the tool us
Written for
WLD 112
All documents for this subject (3)
Seller
Follow
LECTMAGGY
Reviews received
Content preview
WLD 112 final exam questions and answers 2023 with
complete solution
The V-shaped head attachment of a combination square can be used to
locate the center of shafts or other round objects
The tool uses a bubble in a glass vial to check level and plumb is a
level
Internal misalignment between two sections of pipe to be welded end-to-end is checked
using a
Hi-Lo gauge
When using a chain to lift or lower weldment parts, always secure the chain fall to an
overhead structural member with an approved
sling
The gap plate of a plate alignment tool can be changed to match the specified
root opening
Although some fit-up tools are often field-fabricated, which of these tools should never
be field-fabricate?
Jack stands
When using a chain clamp to fit pipe, the required gap between the root faces can e
maintained using a
spacer
Which type of fit-up tool is often used to fit flanges and where heavy-duty reforming of
the pipe is required?
Rim clamp
The degree of distortion that happens during welding is directly related to the
stresses generated during welding
Tools such as chain clamps, rim clamps, and strongbacks are used to properly align
and fit weldments and
help prevent distortion
An abundant amount of face reinforcement
reduces the strength of the weld
Open-root joints should have a root opening of
1/16" to 1/8"
A simple welding sequence used to reduce or eliminate distortion is to make short welds
on alternating sides of a joint
The American society of Mechanical Engineers (ASME) updates their entire code every
3 years
On a WPS, when Dc welding process is specified,
the polarity required must also be given
The point at which steel begins to develop brittle properties is when the carbon content
is just below
1.4%
The letter prefix for the AISI classification system for carbon steels indicates the
Manufacturing process
The principal difference between plain-carbon steels and HSLA steels is
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LECTMAGGY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.
