Chapter 6. Fuel Pumps, Lines, and Filters fully solved 2023

Chapter 6. Fuel Pumps, Lines, and Filters fully solved to 100 microns - correct answer the first fuel filter in the sock inside the fuel tank normally filters particle’s larger than _____________________. Inertia switch - correct answer If it is tripped, which type of safety device will keep the electric fuel pump from operating? Seamless steel tubing and Nylon Plastic - correct answer Fuel lines are constructed from __________________. Pulsating - correct answer Which is not commonly used type of fuel-pump design? 0.6 to 0.8 gallons - correct answer A good fuel pump should be able to supply how much fuel per minute? 20 microns - correct answer Most fuel filters are designed to remove particles larger than _____________. Technician B only - correct answer Technician A says that fuel pump modules are spring-loaded so that they can be compressed to fit into the opening. Technician B says that they are spring-loaded to allow for expansion and contraction of plastic fuel tanks. The amperage draw of an electric fuel pump is high than specified. All of the following are possible cause except: - correct answer Corroded electrical connections at the pump motor 2 pints every 30 seconds - correct answer When testing fuel pump volume, fuel pressure alone is not enough for proper engine operation, typically fuel capacity should be at least___________________.