Essay
Fault Finds Level 3 Diploma in Gas Engineering
- Course
- Institution
Fault Finds Level 3 Diploma in Gas Engineering good for gas
[Show more]
Seller
Follow
strawbsxo
Reviews received
Content preview
Name:Address:
Date:
Appliance type: ideal logic + combi boiler 26kw
Meter: E6
Fault find 3
At approximately 9:00 am I received a call from a customer stating that every
time they turned on the boiler there is a loud noise coming from it which has
brought cause for concern as they think it might blow up. I asked the customer
“does this happens as soon as the boiler turns on” and they said “yes”. Instantly
I started to diagnose the problem before I got to the property as I knew that in
most cases where the boiler is making loud noises there is a problem with the
fan.
When I arrived at the property, I went to the boiler and turned it on. Straight
away I heard the loud whirring noise that the customer was talking about. I knew
that I would need to open the boiler up to inspect it but prior to doing that I
needed to conduct a visual inspection, tightness test and isolate appliance. In my
visual inspection I checked for interference or damage to the appliance that may
affect the efficiency of my work, like a loose bracket that could make the current
meter on the wall unstable. I then inspected the top of the meter by making sure
that the Emergency Control Valve (ECV) falls to the OFF position and that there is
a label indicating what position means the ECV is on or off. Gradually I worked
my way down the meter analysing that the pipework/anaconda is in good
condition (no paint or dents/holes), the brackets holding the meter are secure
and that the tamper seal has not been tampered with and is sitting correctly on
the regulator. When I finished my inspection and was certain that I checked
everything correctly, I moved on to the tightness test. Prior to starting the
tightness test I made sure that the U-gauge I was using was in good working
condition and that the water inside of it was level to zero-zero millibar. I
performed this tightness test to make sure that the installation that was done
before is safe. The first test that I performed on the meter was the let–by test, to
ensure that there is no gas that can pass through the valve when it is turned off,
so I isolated all appliances starting farthest from the meter. I removed the screw
from the test point and replaced it with the tube from the U-gauge. I then put the
ECV to the on position, to make pressure, so that the reading within the U-gauge
was at 10 mb (millibar) and then timed it to run for 1 minute. Once I was fulfilled
with my let-by test that proved no gas was passing through when the ECV was in
the off position I moved on to conducting my temperature stabilisation.
Temperature stabilisation is done to allow the water and gas in the U-gauge to
equalise in temperature so the reading from the tightness test will be accurate.
With the tube still attached to the test point I made sure that the reading on the
U-gauge was back on its original position (zero-zero millibar). I Then turned the
ECV to the on position to allow the pressure to let the water rise to 20 mb,
subsequently timing it for 1 minute. When I was done with my temperature
stabilisation and content that my results were adequate, I moved on to the
tightness test. The tightness test is implemented to test the entire installation
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller strawbsxo. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.97. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
83662 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now