100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
NACE CIP Level 1 Sample Quizzes |99 Questions with 100% Correct Answers | Updated & Verified $7.69
Add to cart

Exam (elaborations)

NACE CIP Level 1 Sample Quizzes |99 Questions with 100% Correct Answers | Updated & Verified

 3 views  0 purchase
  • Course
  • Institution

NACE CIP Level 1 Sample Quizzes |99 Questions with 100% Correct Answers | Updated & Verified

Preview 2 out of 7  pages

  • May 17, 2023
  • 7
  • 2022/2023
  • Exam (elaborations)
  • Questions & answers
avatar-seller
NACE CIP Level 1 Sample Quizzes |99
Questions with 100% Correct Answers |
Updated & Verified
All corrosion of iron at normal ambient conditions is - -an electrochemical process

-The cathode of a corrosion cell - -has an opposite electrical polarity to the anode

-Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three
can be used effectively as galvanic anodes for carbon steel? - -Zinc, aluminum,
magnesium

-A corrosion inhibitor is a substance that, when added to an environment - -decreases
the rate of corrosion

-A decrease in temperature will generally cause the corrosion rate to - -decrease

-The electrolyte is the solution that carries (conducts) - -the anion, and the cations

-While oxidation occurs at the anode, reduction occurs at the cathode - -true

-The four elements of a corrosion cell are anode, the cathode, the electrode, and the
metallic pathway - -False

-The anode is the - -part of the metal that corrodes

-General corrosion is described as - -uniform loss of thickness over the exposed surface

-In order to reach consensus and to resolve conflict on the job, the NACE Inspector's
preferred course of action is to - -actively listen and endeavor to understand the
postions of others.

-A proper coating specification should contain information regarding - -surface
preparation standards, safety, locations to be coated

-According to the NACE attestation, it's OK to accept a gift from a contractor as long as
the gift is below the value identified in your company policy. - -false

-If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to - -seek written
clarification from the specifier

-All of the following are generally included within inspection reports EXCEPT - -cost
information

, -Inspectors reports provide sufficient detail permitting the owner to evaluate - -
contractor's performance, inspector's performance, job progress, work interruptions

-When applying coatings, instruction regarding appropriate types of Personal
Protection Equipment (PPE) will always be found within the - -material safety data
sheet (MSDS) or safety data sheet (SDS)

-Material inventory report should contain all of the following EXCEPT - -overall cost of
materials

-Safety enforcement is one of the primary responsibilities of the coating inspector - -
false

-If the relative humidity is too high, solvent entrapment within the coating film may
occur. - -true

-The dew point is the - -temperature at which moisture condenses on a surface.

-Steel surface temperature reading should be taken - -at the actual work locations

-The coatings inspector must calibrate the magnetic surface thermometer at the job
site. - -False

-If solvent is trapped in a coating film it may - -cause problems with the curing of the
film.

-Electronic Surface Contact Thermometers - -do not require stabilization prior to use

-MOST coatings in the industrial and marine field are inorganic coatings? - -False

-The predominant pigment in sacrificial coating is - -zinc

-The vehicle of a coating consists of - -solvent, binder, and liquid additivess

-All of the following dissolve within the coating EXCEPT - -pigments

-Which coating type slows the penetration of oxygen, water, and soluble salts to form
electrolyte at the coating/metal surface? - -barrier coatings

-Mud cracking of an inorganic zinc-rich (IOZ) primer can be caused by - -applying the
coating too thick

-All of the following are commonly used as primers for steel structures EXCEPT - -vinyl
esters

-Convertible coatings cure by - -a variety of polymerization mechanisms

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller NurseSallyD. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $7.69. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

53920 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$7.69
  • (0)
Add to cart
Added