Samenvatting
Summary Mechanical Systems
- Vak
- Instelling
I have included everything needed for a distinction.
[Meer zien]Voorbeeld 2 van de 10 pagina's
Voorbeeld 2 van de 10 pagina's
In winkelwagen
In winkelwagen
Verkoper
Volgen
ahmedahmad
Voorbeeld van de inhoud
P8Introduction
In this section of the essay the author will describe, with the support of diagrams, the
general layout and operation of a pneumatic actuation system, a hydraulic actuation
system and a mechanical handling system. The author will also describe the basic
principle + operation of a fork lift truck.
What is a forklift truck?
A forklift truck is basically a small vehicle with a device linked at the front that is used
to lift and carry heavy loads. The advantage of using a forklift truck is to carry heavy
loads which both employers and employees cannot lift as the loads are usually too
heavy for a person to carry around in an engineering industry. The disadvantage of
using a forklift truck is that if it carries more load than that it can tolerate, all the
heavy objects will fall off the forklift truck, this could lead to the employers and
employees getting serious injuries and might force them to take a couple of weeks
off depending on how severe the injury is. In terms of application, the forklift is used
in engineering or manufacturing industries as the author have stated previously, to lift
or carry heavy objects and move them from one place to another.
The operation of a forklift truck
Step 1 - the person driving the forklift should be competent and have a license to
drive the vehicle to avoid risky situations inside the engineering industry.
1
, Step 2 – full kit and proper PPE (Personal Protective Equipment) should be worn by
the driver for the safety of himself and other workers in the engineering industry.
Step 3 – the equipment on the forklift truck will have to be inspected properly and
check for the following: brakes, steering controls, tyres to make sure no accidents
will happen and that everyone inside the engineering industry is safe.
Step 4 – the belt should be put on and then start the forklift truck.
Step 5 – look around to make sure that the area where the driver will be passing
through is free from engineering components which, can result to having an unsafe
environment.
Step 6 – drive at a normal speed to avoid accidents.
Step 7 – try to stay away from uneven and slippery surfaces.
Step 8 – make sure that the load carried by the forklift truck does not exceed the
weight limit which the forklift can take.
Step 9 – make sure that the driver can clearly see his way and where he is taking
the load.
Step 10 – make sure that the heavy loads are spread equally.
Step 11 – when the forklift is driven up a particular ramp, the driver will have to
ensure to move forward and when coming down the ramp, come down backwards.
More importantly, do not unload engineering objects when the forklift is about to turn
in a specific direction on the ramp.
Step 12 – ensure that it has enough fuel.
Step 13 – finally, park the forklift in the correct area, guarantee that the vehicle is
turned off and is put back to the same condition, so, the next driver can use it safely.
Analysis and Conclusion
In conclusion, I think that it is significant for engineers to understand how a forklift
operates inside an engineering industry and what it is used for.
2
Dit zijn jouw voordelen als je samenvattingen koopt bij Stuvia:
Bewezen kwaliteit door reviews
Studenten hebben al meer dan 850.000 samenvattingen beoordeeld. Zo weet jij zeker dat je de beste keuze maakt!
In een paar klikken geregeld
Geen gedoe — betaal gewoon eenmalig met iDeal, creditcard of je Stuvia-tegoed en je bent klaar. Geen abonnement nodig.
Direct to-the-point
Studenten maken samenvattingen voor studenten. Dat betekent: actuele inhoud waar jij écht wat aan hebt. Geen overbodige details!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper ahmedahmad. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor $14.61. Je zit daarna nergens aan vast.
Is Stuvia te vertrouwen?
4,6 sterren op Google & Trustpilot (+1000 reviews)
Afgelopen 30 dagen zijn er 64257 samenvattingen verkocht
Opgericht in 2010, al 15 jaar dé plek om samenvattingen te kopen
Laatst bekeken door jou
Tentamen (uitwerkingen) ·
NSG 3039 WEEK 1 QUIZ QUESTIONS | VERIFIED SOLUTION
Essay ·
Unit 15: Object Oriented Programming { P1 M1 D1 }
Samenvatting ·
AQA Psychology: minority influence
College aantekeningen ·
Management in Organizational Behavior Chapter 1
Voordeelbundel ·
ATI PHARMACOLOGY (3VERSIONS)
Voordeelbundel ·
Samenvattingen Psychologie bachelor III, 1ste semester
Tentamen (uitwerkingen) ·
Jarvis: Physical Examination & Health Assessment, 7th Edition Test Bank All Chapters
Samenvatting ·
Samenvatting H3 - Van burger tot ondernemer (bedrijfseconomie havo 3)
