IRC Sections R301 & R302 question and answers rated A+ 2023

IRC Sections R301 & R302 question and answers rated A+ 2023 Where is the weather potential table located? - correct answer R301.2(3) The basic wind speed to be used for a majority of the United States is _________. - correct answer 115 mph R301.2(4) Where is the the figure located for determining the ground snow load? - correct answer R301.2(5) Where is the figure located for determining probability for termite infestation? - correct answer R301.2(6) For the purpose of determining the component and cladding loads on the roof surface of a building, the area at the rise of a gable roof sloped at 20 degrees shall be considered as Pressure Zone _________ at other than the eaves. - correct answer 2 R301.2(7) Where wood structural panels are used to protect windows in buildings located in windborne debris regions, #8 wood screws shall be located at a maximum of __________ on center to fasten those panels that span 8 feet. - correct answer 8 inches R301.2.1.2 Where a referenced document is based upon nominal design wind speeds and no conversion between ultimate design wind speeds and nominal design wind speeds is provided, an ultimate design wind speed of 115 mph shall be converted to a nominal design wind speed of _______ mph - correct answer 89