Unit 43 - Manufacturing Computer Numerical Control Machining Processes
Summary
Summary Unit 43 - Manufacturing Computer Numerical Control Machining Processes Assignment 3 Distinction Grade
34 views 1 purchase
Course
Unit 43 - Manufacturing Computer Numerical Control Machining Processes
Institution
PEARSON (PEARSON)
Book
BTEC National Engineering
Unit 43 - Manufacturing Computer Numerical Control Machining Processes Distinction Grade includes all the necessary details that are stated in the assignment brief. I can reassure you that this is a distinction grade assignment. However, if you are in doubt just send me a message anytime. Thank you
Unit 21 - Electronic Measurement and Testing of Circuits Unit Spec Revision Guide
Unit 22 - Electronic Printed Circuit Board Design and Manufacture Unit Spec revision Guide
Unit 19 - Electronic Devices and Circuits Unit Spec Revision Guide
All for this textbook (28)
Written for
BTEC
PEARSON (PEARSON)
Engineering 2016/2017 NQF
Unit 43 - Manufacturing Computer Numerical Control Machining Processes
All documents for this subject (5)
Seller
Follow
JuliusCesar1
Reviews received
Content preview
BTEC Assignment Brief
Pearson BTEC Level 3 National Foundation Diploma in Engineering
Pearson BTEC Level 3 National Diploma in Engineering
Pearson BTEC Level 3 National Diploma in Electrical and Electronic
Engineering
Pearson BTEC Level 3 National Diploma in Mechanical Engineering
Pearson BTEC Level 3 National Diploma in Computer Engineering
Pearson BTEC Level 3 National Diploma in Manufacturing Engineering
Pearson BTEC Level 3 National Diploma in Aeronautical Engineering
Pearson BTEC Level 3 National Extended Diploma in Engineering
Qualification
Pearson BTEC Level 3 National Extended Diploma in Electrical and
Electronic Engineering
Pearson BTEC Level 3 National Extended Diploma in Mechanical
Engineering
Pearson BTEC Level 3 National Extended Diploma in Computer
Engineering
Pearson BTEC Level 3 National Extended Diploma in Manufacturing
Engineering
Pearson BTEC Level 3 National Extended Diploma in Aeronautical
Engineering
Unit number
and title Unit 43: Manufacturing Computer Numerical Control Machining
Processes
Student Name
Assignment
Reviewing CNC processes and lessons learnt
title
Assessor Z. Rushiti
Issue date W/C 16.01.2023
Hand in W/C 30.01.2023
deadline
You are working as a trainee CNC operator for a company that
manufactures complex components that would be difficult to
manufacture using traditional methods.
Vocational
Your supervisor would now like you to produce a reflective report,
Scenario or
based on what happened when you programmed, set-up, simulated,
Context
carried out and quality checked the CNC machining of a component,
in which you identify what went well, what could have gone better
and what you can take forward to the next stage of your development
as an engineer.
You are going to review and reflect on the practical activities you
carried out for Assignment 2. You now need to produce a report that
includes the ‘lessons learnt’ during the activities.
Task 1
To do this:
, You will need to collate your evidence from Assignment 2. You should
then review and reflect on the activities that you completed and the
behaviours that you showed when you programmed, set-up,
simulated, carried out and quality checked the CNC machining of a
component.
Your report should:
• Review and reflect on the full range of activities that you
completed. You should include information about the actions
you took to ensure health and safety in the workplace, and
how you effectively developed and applied general engineering
and programming and machining skills to a professional
standard. You need to consider the effectiveness and efficiency
of your programming, the setting-up and operation of
machinery and issues relating to sustainability. Ensure you
demonstrate a good technical understanding and analysis of
CNC programming and machining processes.
• Review the engineering behaviours you used, and how
successfully/consistently/professionally they were applied,
including taking initiative and responsibility, communication
and literacy skills, and your ability to solve problems.
• Suggest and recommend improvements that could be made
when carrying out similar activities in the future, especially
related to:
● The set-up documentation, programming and the use of
the machining processes and equipment to manufacture
the component more efficiently and accurately while
considering sustainability
● The application of the relevant behaviours.
Your report should include correct technical language and clearly
differentiate between fact and opinion.
Checklist of A report attached to the portfolio from Assignment 2 that reviews the
evidence processes used, reflects on own performance and provides a
required conclusion focusing on the improvements that could be made.
Criteria covered by this task:
Unit/Criteria
To achieve the criteria you must show that you are able to:
reference
43/D.D3 Demonstrate consistently good technical understanding and analysis of
CNC programming and machining processes, including the application of
relevant behaviours and general engineering skills to a professional
standard
43/D.M5 Recommend improvements to the set up and use of CNC programming
and machining processes and to the relevant behaviours applied
,43/D.P6 Explain how health and safety, CNC programming, machining and
general engineering skills were applied effectively during the
manufacturing process
Explain how relevant behaviours were applied effectively during the
43/D.P7 manufacturing process
Sources of Books
information to
Smid P; CNC Programming Handbook, 3rd Edition (Industrial Press,
support you
2007); ISBN 9780831133474.
with this
Assignment Smid P; CNC setup for Milling and Turning: Mastering CNC Control
Systems (Industrial Press Inc., 2010) ISBN 9780831133504
Websites
www.haas.co.uk
http://website.denford.ltd.uk
www.techsoft.co.uk
www.fanuc.eu/uk/en
www.heidenhain.co.uk
Other
assessment
materials
attached to
this
Assignment
Brief
During the planning phase for the Adapter plate, we decide to use the Bridgeport 500 CNC
milling machine, because of the sophisticated features can create and the types of tools it
has a very crucial bit that we done it learn about the health and safety rules and regulations.
CNC Milling Machine health and Safety: When we done the research about
the tools used to manufacture the adapter plate, we had to go into the
workshop to check the tools available and their sizes. Before we got into the
workshop, we had to make sure we had safety goggles on to keep our eyes
protected and we had to follow the workshop rules that we must only walk on
the designated walkway which was between the yellow lines at all times. There
are many PPE (mandatory) signs in the workshop to make sure that you have
the right PPE on. Also, we must follow the Regulations Set out by the
government to make our working environment safe these regulations can
include COSHH regulation, PPE regulation and Manual handling regulation these are all very
important and we must follow them and remind people about them by having White boards
with the information’s on so the employees will remember what they can and can’t do.
1. PPE Regulation at work 2002: This Regulation requires the employer to provide
suitable PPE to all employees where is required and a safe place to store it, this
regulation also requires the employee to follow the rules set out by the employer
and wear the PPE at all times when required.
2. Manual Handling Operations Regulation 1992: This Regulation requires the employer
to give proper training to employees about lifting materials manually and how
should they do it and what method to use (e.g., use a trolley for objects heavier than
20 kg) This regulation also states that the employer must try to reduce manual
handling operations and the likelihood of them occurring.
3. Control of Substances Hazardous to Health regulation 2002: This regulation works in
close relation with the PPE regulation as the employer must give proper PPE and the
employees must use them where is required to. It also states in the regulation that
the employer must provide professional training to the employees about hazardous
chemicals and how to store them and what to do during and emergency. In the
regulation it also states that proper ventilation should be present where those
chemicals are used e.g., coolant used during manufacturing, ventilation should be
turned on to prevent employees from breathing in coolant particles and becoming
sick. The regulation also requires the employer to send the employees on Health
checks every 6 months or so.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller JuliusCesar1. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $22.99. You're not tied to anything after your purchase.
