NCCER Module 4 (Power tools) 2023 Quiz 100% Verified
when using power tools, never engage the?
trigger lock.
before replacing parts such as bits, blades or disks on any tool, you must?
make sure it is disconnected from its source or energy
most hammer drills will not hammer until pressure is...
NCCER Module 4 (Power tools) 2023 Quiz 100% Verified
when using power tools, never engage the?
trigger lock.
before replacing parts such as bits, blades or disks on any tool, you must?
make sure it is disconnected from its source or energy
most hammer drills will not hammer until pressure is?
applied to the drill bit against a surface
a pneumatic drill is commonly used?
when there is no source of electricity
never use a circular saw that does not have an upper blade guard because?
it protects workers from flying debris and from touching the spinning blade
when using a circular saw, be sure to cut on the waste side of the cut mark to
allow for the blades?
Kerf
saws with a fine blade that are excellent for delicate and intricate cutting are
called?
Saber saws
before you plug any saw into a power source, make sure?
the switch is in the off position
a saw that has a thin, one piece blade that runs around guides at either end of the
saw is a?
Band saw
a power miter saw combines a miter box with a?
Circular saw
an angle grinder is used to grind?
away hard, heavy materials and to grind surfaces such as pipes, plates or welds
the adjustable tool rest on a bench grinder should be positioned?
1/8th on and inch
a good way to check the condition of the grinding wheel on a bench grinder is to?
slide the wheel onto a rod that fits through the wheel hole
a grinder can catch on rough material edges and shift around, especially when
using rotary bits called?
Burr bits
a low-velocity fastening system that is used to drive steel pins or threaded studs
into masonry and steel is a?
Powder actuated tool
special training and certification is required before using any kind of?
Powder actuated fastening tool
before using a pneumatically powered nailer for the first time, it is important to?
read the manufacturers instructions
if a pneumatic nailer is not fired properly, before attempting repairs be sure to?
disconnect the air hose
a power tool that is well suited for breaking up concrete during demolition work is
a?
pavement breaker
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LECTMAGGY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
