Private Pilot Stage 1 Exam 2023 with 100% correct answers

What are the characteristics of a monocoque airplane structure? - correct answer -Almost all structural loads are carried by the outer skin of the airplane. Which control surfaces are usually located on the empennage? - correct answer -Rudder, elevator, stabilator What condition must be present for carburetor ice to form? - correct answer -High relative humidity A power loss occurs when you apply carburetor heat because - correct answer -less dense air is entering the engine. Detonation can be described as - correct answer -fuel in the cylinders exploding instead of burning smoothly. If the engine magneto switch is turned to the "OFF" position, but the engine continues to run, the probable cause is - correct answer -a broken magneto ground wire. Excessive cylinder head and engine oil temperatures can be caused by - correct answer -using a lower-than-normal fuel grade. The three pressure instruments connected to the pitot-static system are the - correct answer -airspeed indicator, altimeter, and vertical speed indicator. According to the markings on the accompanying airspeed indicator, what is the maximum speed with flaps fully extended? - correct answer -85 knots (white arc) Assume that you land at an airport with the altimeter set to 29.92 instead of the current setting of 30.00. Wh