Summary
Summary Protein Science (AM_470145)
- Course
- Institution
This document consists of a summary of the course Protein Science, corresponding to the Master Biomolecular Science.
[Show more]
2 reviews
By: amberkulkens • 2 months ago
By: helunsenoglu • 3 months ago
Seller
Follow
danielleband
Reviews received
Available practice questions
Exam Protein Science 2022
Flashcards
21 Flashcards
$3.74
2 sales
Flashcards
21 Flashcards
$3.74
2 sales
Some examples from this set of practice questions
1.
Attractive interactions can occur even between two non-polar groups within a protein molecule. These attractive interactions are called van der Waals interactions or London dispersion forces. Explain how these interactions originate and can lead to attraction between two non-polar groups.
Answer: Spontaneous dipole occurs due to temporary, stochastic, uneven electron distribution. The temporary dipole induces a dipole in neighboring molecule/group. The induced dipole has the same orientation as the temporary dipole, so the two dipoles attract each other.
2.
What does the term “electronegativity” mean? With regard to electronegativity, explain the differences in electron distribution between a C-C, a C-H, and a C-O single bond
Answer: Electronegativity describes the ability to attract electrons within a chemical bond. C-H slightly polar, partial negative charge at C Strongly polar, partial negative charge at O C-C unpolar, no difference in electronegativity
3.
Explain what the term “dielectric constant” means. What are typical values for the dielectric constant in water and in a bio-membrane?
Answer: The dielectric constant quantifies the influence of the medium on the electrostatic interaction energy. Typical values are 80 for water and 4 for a biomembrane
4.
The equilibrium constant describing a chemical reaction is related to the free energy change of this reaction. How exactly does the equilibrium constant depend on the free energy change (not at all, linearly, exponentially, logarithmically,…..) and what is an important consequence of this dependency?
Answer: The equilibrium constant depends exponentially on the free energy of the reaction. As a consequence, small energy changes can drastically change the equilibrium.
5.
The energy difference between properly folded (native) and completely unfolded state is quite small (20-30 kJ/mol, corresponding to energy of ~5 H-bonds, compare to covalent bond >200 kJ/mol). Explain this phenomenon and state two important consequences of the low free energy difference.
Answer: Residues can form non-covalent interactions with other residues, stabilizing the protein. However, residues can alternatively form bonds with water, which gives nearly the same energy. So, the interactions with other residues in the native structure and interactions with water in the unfolded state nearly cancel out. Moreover, the entropy typically decreases when the protein is folded (less flexible), but the entropy of the water molecules that were arranged in the water cage in the unfolded state (and are released into bulk wate upon folding) increases. Consequences: 1. Proteins quite unstable, to be handled with care 2. A single interaction may lead to small conformation change
6.
Several algorithms are available for predicting the secondary structure of a protein based on its known primary amino acid sequence, e.g. the Chou-Fasman approach. Explain the principle of how this approach works.
Answer: Each residue has its characteristic likelihood to be located in a helix/sheet/loop etc (calculated based on information from known structures). For a chosen stretch of amino acid residues in the new sequence (10-20 residues) these probabilities are summed up and normalized. This procedure is repeated for the next stretch of residues and so on.
7.
Does a hydrophobic (as compared with water) environment increase or decrease the pKa value of a basic amino acid side-chain? Give reasons for your answer.
Answer: In a hydrophobic environment charges are disfavored, therefore the protonated/deprotonated equilibrium of a basic reside will be shifted towards the deprotonated state. Consequently, the pKa will decrease.
8.
Serine proteases represent an important class of proteases. Next to the catalytically active serine residue these proteases display an oxyanion hole. Which role do you expect for the oxyanion hole related to the transition state and the proteolysis reaction?
Answer: The oxyanion hole binds to the oxygen atom of the peptide bond that is about to be split. This oxygen carries a stronger (partial) negative charge in the transition state (“oxyanion”) as compared to the substrate. Consequently the oxyanion hole stabilizes the transition state.
9.
Interactions between an inhibitor and a protein can be characterized by the KI value. What is a KI value? Give an equation and explain in words. The inhibitor I binds to the enzyme E in a 1:1 ratio. You know the KI value, 10^-5 M. What percentage of enzyme molecules has the inhibitor bound if [I] = 10^-4 M or 10^-7 M, respectively?
Answer: KI = [I[E]/[IE] It represents the equilibrium dissociation constant of the inhibitor. With [I] = 10^-4 90 % of the enzyme molecules have the Inhibitor bound With [I] = 10^-7 1 % of the enzyme molecules have the inhibitor bound
10.
Explain the molecular mechanism of the reversible switch employed by G-proteins.
Answer: These proteins switch back and forth between a GTP and a GDP bound state. If GTP is bound the terminal phosphate forms hydrogen bonds that move a protein domain, if GTP is hydrolyzed and replaced by GDP then this phosphate is not present, the hydrogen bond not formed and the domain moves back. This structure change can be used for signal transduction.
Content preview
Summary Protein Science, Danielle Band, 2702582Lecture 1. The Basics
Atoms and elements
Atoms contain a nucleus and a cloud of electrons, orbiting around that
nucleus. Atoms differ from one another by the number of positively charged
protons within the nucleus and an equal number of negatively charged
electrons. Within molecules, atoms are connected by covalent bonds. A
single covalent bond is created by sharing one pair of electrons. By sharing
electrons, atoms strive to get their outermost orbitals filled. The outermost
orbital can accommodate 8 electrons. In double bonds, four instead of two
electrons are shared. This has consequences for the physical properties of
the molecule, e.g. free rotation is impossible around double bonds, and the
molecule is flat (angle of 180°).
Carbon (C) Carbon constitutes the most abundant element in biology
(60% of our body's dry weight). Carbon has 4 electrons in its outer shell, so it has to
lose or acquire 4 electrons for outer shell saturation. The respective bonds show
tetrahedral orientation. If a carbon atom has bound 4 different substituents,
asymmetry dictates the existence of two stereo isomers, an L and a D form. Amino
acids in proteins are exclusively found in L-configuration. Only in the cell wall of
bacteria D-amino acids are present to support bacterial growth. Carbon has a unique
role in the cell because of its ability to form strong covalent bonds with other carbon
atoms to form chains, rings, or branches.
Hydrogen (H) Hydrogen is the smallest atom in Chemistry as well as Biology, and contains just one
electron and one proton.
Nitrogen (N) Nitrogen represents the second to most abundant element in biological dry body
mass (11%). With 5 electrons in its outer shell, nitrogen mostly accepts three
electrons to form 3 bonds.
Many C–N compounds are
building blocks, also called
functional groups or just
“functions”.
They constitute recurring themes
in biochemistry. Shown here is the amine (or amino) group, which can form amide
bonds with acidic groups.
Oxygen (O) Oxygen represents 9% of our body’s dry mass. With two electrons missing in its
outer shell, oxygen mostly accepts two electrons to form two bonds.
Many C–O compounds
are building blocks, also
called functional groups
or just “functions”. They
constitute recurring
themes in biochemistry in
the form of carboxylic
acids, carboxylate, esters,
amides, thioesters, acyl
phosphates, acyl chlorides, or acid anhydrides.
1
,Summary Protein Science, Danielle Band, 2702582
Forces and interactions
Electronegativity
Within a covalent bond, some atoms are more able to attract electrons
than others which depends on the electronegativity. Electronegativity
takes place in functional groups when the atoms are not the same. The
atoms in the first row of the periodic table have the highest
electronegativity, because they have fewer shells, and are thus not able to
shield the positive charge of the nucleus. When the atom gets bigger, and
has more shells, the atom attracts electrons less. Electronegativity can
invoke polarity, because there is an uneven charge distribution within
molecules. The magnitude of this effect is dependent on the differences in
electronegativity between the atoms actually participating in a chemical
bond. In extreme cases, differences in electronegativity can even allow the
generation of ions, which may still attract each other in ionic bonds.
Protonation, and deprotonation (pH)
When bound to atoms of higher
electronegativity, hydrogens can dissociate
and cause ion pairs. When the released
proton subsequently binds to water,
hydronium ions (H3O+) are formed. This is called protonation and
deprotonation. Amino groups show the opposite tendency, they can
accept protons and thereby become positively charged. This very
reaction happens as well in pure water itself.
pH = -log[𝐻3 𝑂+ ] [𝐻3 𝑂+] = 10−𝑝𝐻 M
The concentration of hydronium ions (in mol/l, M) is expressed as pH. For strong bases, or acids, almost
complete (de)protonation takes place. For weak acids and basis there is an equilibrium between
protonation, and deprotonation. To quantify the tendency to acquire or loose protons, the pKa value
indicates at which pH a compound is half protonated. The 𝐾𝑎 value is the equilibrium dissociation
constant of an acid. Of both formula’s below, logarithm formula is easier to handle because the pKa
value is the pH value at which 50% of the protons are released.
[𝐴− ][𝐻 + ]
𝑘𝑎 = 𝑝𝐾𝑎 = −𝑙𝑜𝑔10 𝐾𝑎
[𝐻𝐴]
2
,Summary Protein Science, Danielle Band, 2702582
Interactions between chemical groups (always in the exam)
Noncovalent Short range repulsions = Short range repulsion
interactions occurs when the atoms come in close proximity,
involving less than the sum of van der Waals radii (sum of
charges the radius of the atom), and the orbitals start to
overlap. For each atom, the van der Waals radii
may vary responding to environmental influence.
This highly increases the energy needed to interact
and eventually makes the interaction impossible.
Electrostatic forces – point
charges = Electrostatic forces are
the attractive or repulsive
interactions between objects
having electric charges. A point charge is a hypothetical charge located at a single
point in space. Proteins that have taken up an electron, have, in theory, a point
charge, but because the charge is normally spread out between multiple atoms, it
loses its name as a point charge.
𝑍𝐴 𝑍𝐵 𝑒 2
∆𝐸 =
𝜀𝑟𝐴𝐵
The energy difference for approaching two atoms, A and B, with charge Z from infinite
distance to distance r can be calculated using Coulomb’s law. In this formula is e the
charge of an electron and ɛ the dielectric constant. The value of ɛ depends on the
environment/medium. Strictly, Coulomb’s law holds true only for point charges. Since
ions in proteins are of finite size, the equation is valid only at distances significantly
greater than atomic dimensions. Salt bridges in proteins occur between ionizable side
chains. Due to processes like resonance and protonation, often components of
hydrogen bonding are involved.
Electrostatic forces – dipoles = Different electron attraction by atoms comprising a
group or side chain may induce an uneven distribution of electrons, this is called a
dipole.
𝜇𝐷 = 𝑍𝑑
The dipole moment 𝜇 quals the product of the
magnitude (size) of the separated excess charge Z
times the separation distance d. Dipole moments are
vectors with magnitude and direction. There are
three different dipoles:
• Permanent dipoles – This may exert attractive
or repulsive forces, dependent on spatial
arrangement. Permanent dipoles occur when
there is a significant difference in
electronegativity between one atom, and the
atom covalently attached. When two
permanent dipoles interact it creates a
dipole-dipole interaction. The partial positive
side of an molecule only attracts the partial negative site of another molecule,
3
, Summary Protein Science, Danielle Band, 2702582
and repulses its partial positive site. When the partial positive is closer to the
partial negative than to the partial positive, attraction takes place.
• Induced dipoles – Induced dipols take place when only one of the two
molecules has a permanent dipole, and is thus polar/charged, and the other
one is non-polar or neutral. The only attractive force originates from the
neigboring permanent dipole, and is thus always attractive.
• (London) Dispersion forces - London's dispersion forces can be defined as a
temporary attractive force due to the formation of temporary dipoles in a
nonpolar molecule. The other name for this force is van der Waals interaction
Van der Waals interactions = London or dispersion forces lead to van der Waals
interactions which are distance dependent. Since they occur amongst all kinds of
molecules, they are more abundant than other dipolar interactions.
Hydrogen bonds = Hydrogen bonds occur as two
electronegative atoms compete for the same hydrogen
atom. Hydrogen can be covalently attached to one atom, but still interact with
another one due to its small size and low electronegativity (high charge). Lengths and
strengths of hydrogen bonds depend on the electronegativities of the participating
atoms. Water is often (not in ice) involved in hydrogen bonding, but also many amino
acid side chains can potentially be involved in hydrogen bonding.
Hydrophobic The hydrophobic effect forces nonpolar solutes to interact with each other instead
effect of the solvent, excluding them from water. As a result, hydrophobic side chains are
forced into the protein’s interior. This effect comprises a major force ruling in
protein folding.
Basic thermodynamics/kinetics
The Gibbs free energy
ΔG = ΔH - TΔS
The Gibbs free energy
change combines the
changes of Enthalpy, and
Entropy. Enthalpy (ΔH)
reflects the difference of
noncovalent interactions,
and has to be < 0 to be
able to release heat. The
entropy (ΔS) is the
disorder of a system, and
is > 0 if t disorder increases. The second las of thermodynamics states that the disorder of the universe
always increases which means that: ∆𝑆𝑢𝑛𝑖𝑣𝑒𝑟𝑠𝑒 = ∆𝑆𝑠𝑦𝑠𝑡𝑒𝑚 + ∆𝑆𝑠𝑢𝑟𝑟𝑜𝑢𝑛𝑑𝑖𝑛𝑔𝑠 > 0.
Non-polar solutes form droplets (stick together)
to minimize the surface that comes in contact
with water. This causes a cage structure of water
molecules surrounding the non-polar solutes. The
inside of this cage had more structure than the
surrounding bulk media. This means that the
surrounding bulk media has more freedom than the non-polar solutes.
4
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller danielleband. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.46. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
50155 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 15 years now