Summary

Summary Grade 9 Technology: Electrical systems and control

0 purchase

Course
Tec

Institution
7th Grade

An in dept, thorough, detailed, effective and efficient set of Technology study notes covering the section Electrical systems and control for grade 9 term 3 content. The notes are in the format of Summary, Self Test Questions and Answers.

[Show more]

Preview 3 out of 18 pages

View example

Uploaded on October 28, 2023
Number of pages 18
Written in 2023/2024
Type Summary

study notes

Institution
7th Grade
Course
Tec
Schooljaar 200

$2.82

Add to cart

Save

100% satisfaction guarantee
Immediately available after payment
Both online and in PDF
No strings attached

Chapter 6 : Electrical systems and control
Unit 1: Revision of Electric Circuits and Components

Summary:

Cells in Series:
● - Cells in series increase the voltage in a circuit.
● - Higher voltage makes lamps shine brighter.

Cells in Parallel:
● - Cells in parallel increase energy capacity.
● - They keep the circuit running longer but don't increase voltage.

Lamps in Series:
● - Lamps connected in series are less bright than a single lamp.

Lamps in Parallel:
● - Lamps connected in parallel shine as brightly as a single lamp.

Logic Gates:
● - AND logic gates use switches connected in series.
● - OR logic gates use switches connected in parallel.

Conventional Current:
● - Electric current moves from the positive terminal to the negative terminal.
● - This flow is known as conventional current.

Ohm's Law:
● - Current is proportional to potential difference, provided resistance is constant.
● - Useful for circuit calculations.

Component Symbols:
● - Cells, lamps, and switches in series/parallel circuits.
● - Comparing brightness in different circuits.

,Self Test Questions:

1. What happens to the voltage in a circuit when cells are connected in series?
2. Explain how cells connected in parallel affect the energy capacity in a circuit.
3. Why do lamps connected in series shine less brightly?
4. How are AND logic gates constructed, and what is their purpose?
5. Describe the direction of conventional current in an electric circuit.

Answers:

1. Cells in series increase the voltage in a circuit, making lamps shine brighter.
2. Cells in parallel do not affect voltage but increase energy capacity, extending the circuit's run time.
3. Lamps connected in series are dimmer because they share the voltage.
4. AND logic gates use switches connected in series to create an output only when all inputs are ON.
They are used for specific conditional actions.
5. Conventional current flows from the positive terminal of the cell to the negative terminal in an electric
circuit.

Unit 2 Ohm's Law and resistance

Summary:

Ohm's Law:
● - Ohm's Law states that current strength in a conductor is directly proportional to the potential
difference across it if the resistance remains constant.
● - The formula for Ohm's Law is V/I = R, where V is voltage (measured in volts), I is current
strength (measured in amperes), and R is resistance (measured in ohms).

Calculating Voltage, Current, and Resistance:
● - You can use the formulas V = I x R, I = V/R, or R = V/I to calculate voltage, current, or
resistance in electric circuits.

Resistor Color Codes:
● - Resistors have a color code with bands representing their resistance value.

, ● - The accuracy rating of resistors can be 2%, 5%, or 10%, indicated by the color of the fourth
band.

Decoding Resistor Color Codes:
● - Use a decoder chart to read the color bands on a resistor.
● - For example, green (band 1) represents 5, orange (band 2) represents 3, and red (band 3)
indicates two additional zeros. So, the resistance is 5300 ohms with a 5% accuracy rating.

Self Test Questions:
1. What does Ohm's Law state, and how is it represented mathematically?
2. Explain the units used to measure voltage, current strength, and resistance.
3. What are the three rearrangements of the Ohm's Law formula?
4. How can you calculate the resistance if you know the voltage and current?
5. How is the resistor's accuracy rating indicated in its color code?

Answers:
1. Ohm's Law states that current strength is directly proportional to potential difference if resistance is
constant. It is represented as V/I = R.
2. Voltage is measured in volts (V), current strength in amperes (A), and resistance in ohms (Ω).
3. The three rearrangements of Ohm's Law are V = I x R, I = V/R, and R = V/I.
4. To calculate resistance, use R = V/I when you know voltage and current.
5. The accuracy rating of a resistor is indicated by the color of the fourth band in the color code. Red
represents 2%, gold represents 5%, and silver represents 10%.

Summary
● Electric components are represented by symbols in circuit diagrams.
● Conventional current in a circuit moves from the positive terminal of the energy source to the
negative terminal.

● Cells connected in series increase the voltage across the circuit. Cells connected in parallel do not
increase the circuit voltage.

● Lamps connected in series shine less brightly than one lamp on its own.
● Lamps connected in parallel shine as brightly as one lamp.
● Switches connected in series form an AND logic gate.
● Switches connected in parallel form an OR logic gate.
● Ohm's Law states that the current through a conductor is directly proportional to the potential
difference across the conductor provided the resistance of the conductor remains constant.

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller shazanamia. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $2.82. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

65539 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 15 years now

Start selling