100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Smog Check Procedures Manual 100% verified $9.99   Add to cart

Exam (elaborations)

Smog Check Procedures Manual 100% verified

 1 view  0 purchase
  • Course
  • Smog Check Inspector CA
  • Institution
  • Smog Check Inspector CA

Smog Check Procedures Manual 100% verified

Preview 2 out of 5  pages

  • November 3, 2023
  • 5
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
  • smog check inspector ca
  • Smog Check Inspector CA
  • Smog Check Inspector CA
avatar-seller
Ashley96
Smog Check Procedures Manual

1) Check for vehicle test restrictions (AWD, GVWR, etc). If test restrictions apply, inform the
customer.

2) Ensure the customer is provided an estimate and the required test type is determined prior to
drafting the invoice

3) Check hat all required equipment is up-to-date, maintained, and calibrated

4) Ensure vehicle is safe to test - ANSWhat are the steps of the Pre-Inspection/Pre-Repair
Check List?

1) If a stations lacks the equipment, tools, personnel, reference materials necessary to inspect a
particular vehicle
2) If a station lacks the equipment, tools, personnel, reference materials necessary to repair a
particular vehicle
3) If as a matter of policy, a test-and-repair does not repair certain types of vehicles or
inspection failures - ANSFor what 3 reasons must a station reject a vehicle during the
Pre-Inspection/Pre-Repair Check List?

Enter "NONE" - ANSIf there is no license plate, what should you enter?

Abort the test and start over using the correct info - ANSWhat happens if an error is found after
changes no longer can be made to the OIS or EIS?

True, enter just the last 7 digits - ANSDon't enter the "E" preceding the plate number of
government vehicles. True or False?

Enter "NONE" - ANSIf the odometer is missing or illegible, what should you enter into the EIS or
OIS?

Enter "R" for vehicle certification type - ANSWhat should you enter for a vehicle equipped with a
Referee label?

1) SPCNS
2) grey market
3) vehicles with an engine change - ANSWhich vehicles should you not inspect unless it has a
BAR Referee Label?

Enter the fuel in which the vehicle was operating when it arrived at the station - ANSWhat fuel
type should you enter for dual/bi-fuel vehicles?

, Motorhomes and heavy duty vehicles with a drive axle weight over 5,000 lbs. - ANSWhich
'76-'99 vehicles in Enhanced Areas are excluded from ASM inspections and instead have TSI
inspections?

1) AWD or 4WD
2) Traction control that cannot be disabled
3) Too large to safely fit on dynamometer
4) Heavy duty with GVWR of 8,501 or greater
5) Heavy duty with unloaded drive axle weight over 5,000 lbs - ANSWhich vehicle designs are
not compatible with the ASM test?

Vehicle is not currently transporting loads for delivery or is not carrying items of a temporary
nature; excludes parts that have been welded, bolted, or permanently affixed - ANSWhat does
"unloaded" mean for purposes of a Smog Check?

Second gear; only select other gears to maintain the EIS specified RPM range - ANSWhat gear
should the ASM be conducted in?

Any alternative driving modes like "towing," "low traction," "performance," "sport" - ANSWhich
gear's should you not use for automatic transmissions for the ASM inspection?

1) unsafe - gasoline leaks, large coolant leaks, faulty brakes, tire failure

2) unfit - low oil pressure, overheating, idle RPM outside of required limits

3) incompatible - traction control will not disengage - ANSWhat are three examples of unsafe,
unfit, or incompatible conditions?

e.g. pressure sensors, temperature sensors, oxygen sensors - ANSVISUAL INSPECTION:
Computers, Sensors, Switches

(only computer-controlled)

mechanical or electronic devices, mechanisms, or systems that control ignition timing -
ANSVISUAL INSPECTION: Ignition Spark Controls

(all computer-controlled vehicles)

Air flow meters, Injectors, Throttle bodies, Throttle positioners, Anti-"dieseling" solenoids, Early
fuel evaporative, Choke controls, Deceleration controls, Dashpots, Carburetion, Fuel Injection -
ANSVISUAL INSPECTION: Fuel Metering System

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Ashley96. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $9.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

80630 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$9.99
  • (0)
  Add to cart