DCSE 1000 client foundations pre boot environment 2023/2024 verified to pass

DCSE 1000 client foundations pre boot environment BIOS - correct answer Basic input output system is a program stored in the read only memory (ROM) which is the first set of code that is executed when the computer is switched on. the key function of the BIOS is to identify, test and activate the system devices that are required for the funtioning of the computer. BIOS Activates all hardware required to boot including: Chipsets, processors and caches, system meory, internal drives, graphics and audio controllers and internal expansion cards. Press F2 during POST - correct answer brings up the bios settings screen on desktops and laptops (dell) UEFI - correct answer Unified Extensible Firmware Interface spec. defines a new model for the interface between PC OS platform Firmware. Dell UEFI BIOS in the portables and desktop products into one single UEFI BIOS. There is no difference in te boot sequence unless the UEFI option is checked in the boot sequence setting in the bios page. Types of BIOS - correct answer Tabbed BIOS, Tree BIOS Accessing BIOS - correct answer Restart computer, when the dell logo appears, tap F2 until the entering setup message appears. Or, you can also enter setup by accessing one time boot menu,. To access system setup/BIOS from one time boot menu, perform steps, Restart computer, when the dell logo appears tap the F12 key to access the one time boot menu. from the menu options select enter setup and press the enter key. Access bios on venue tablets. - correct answer press the power button on the tablet. before the dell logo is displayed, press the volume down button to get into system setup(similar to Galaxy S6) access fast boot on Dell venue tablets( android) - correct answer fast boot is pre boot environment of android OS that starts before android itself does. to access fastboot press and hold volume down and power button for 5 seconds. release power button while continuing to hold the volume down button for another 3 seconds. The following commands can be used in FastBoot REBOOT DROIDBOOT REBOOT RECOVERY POWER OFF Factory Data Reset on venue tablets (android) - correct answer Step 1. press and hold the volume down and power button for 5 seconds. 1. Release the power button while continuing to hold the volume down button for another 3 seconds, this will place the device in FastBoot mode. Step 2. 1. Use the volume down to select RECOVERY mode. 2. press the power button and volume up to display RECOVERY mode menu. Step 3. in recovery mode use volume down to select the wipe data/factory reset option and press power button. Step 4. 1. confirm wipe of all data 2. use the volume down to select yes to delete all user data and use the power button to begin the reset. Step 5. 1. After reset has been completed use the volume button to select reboot system now option and press power button to reboot system.