100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
2023 update DC BOILER/STATIONARY Third testing questions with complete solutions $19.99   Add to cart

Exam (elaborations)

2023 update DC BOILER/STATIONARY Third testing questions with complete solutions

 3 views  0 purchase
  • Course
  • Institution

2023 update DC BOILER/STATIONARY Third testing questions with complete solutions 2023 update DC BOILER/STATIONARY Third testing questions with complete solutions 2023 update DC BOILER/STATIONARY Third testing questions with complete solutions 2023 update DC BOILER/STATIONARY Third testing ...

[Show more]

Preview 3 out of 29  pages

  • December 17, 2023
  • 29
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
avatar-seller
2023 update DC BOILER/STATIONARY Third testing
questions with complete solutions


The component in which liquid vapor by absorbing heat is called? - ANSWER-Evaporator



Select the best answer electrical grounding method? - ANSWER-Metal stake drive 8 foot into the
ground.



A _____ valve should be used for throttling purpose? - ANSWER-Globe



What is the acceptable range for residual sodium sulfite in the boiler maintain? - ANSWER-30-70



What is the BTU content of a gallon of #4? - ANSWER-146,000



What does a zeolite water softener system use as a means of regeneration? - ANSWER-Brine



What are the 4 steps for a Zeolite Rejuvenation water softener process? - ANSWER-Back wash

Backwash, brine, rinse, service



Where is medium temperature is liquid found? - ANSWER-Condenser



Where is high temperature vapor found? - ANSWER-At the discharge of the compressor or condenser



What stays are used to support the burner chamber in a scotch marine boiler? - ANSWER-Diagonal Stays



What type of safety valve is this? - ANSWER-( Full) Crosby nozzle-type safety valve. Page 365 BOG



What type of safety valve is this? - ANSWER-( Full) Crosby nozzle-type safety valve. Page 365 BOG

, 2023 update DC BOILER/STATIONARY Third testing
questions with complete solutions

Where do you found superheat reading? - ANSWER-Take suction line pressure

Cross reference using a P/T Chart

Get tail coil Temperature

Subtract cross references temperature from tail coil temperature

Result will be superheat



Name the wire that connects all component of a system to a physical ground or water pipe? - ANSWER-
Grounding Electrode Conductor



Where do get sub-cooling reading? - ANSWER-Take liquid line pressure

Cross reference to temperature using a P/T Chart

Get liquid line temperature

Subtract actual temperature from cross referenced temperature

Result is sub-cooling



On the boilers that have both Quick opening and Screw type blow down valves, the Quick opening valve
must be located? - ANSWER-Closest to the boiler and followed by the screw type valve



High pressure boilers equipped with Quick opening and Screw type valves are blown down how? -
ANSWER-By opening the Quick opening valve first and closing it Last. Page 403 BOG



ASME Code defines a slow opening valve as what? - ANSWER-One requiring at least 5 full 360 degree
turns between full open and close position. Page 374



A 300 Horsepower boiler operating at 100psi has an average load of 75% with 80% condensate return
and 5% blow down. The treatment provides a chemical which costs $8.75 per gallon, and will treat 600
gallon. Find the amount of the chemical needed for the day period, and the cost of the chemical for a 30
days period? - ANSWER-Water In = Water Out

Makeup + Condensate Return = Evaporator + Blow Down

, 2023 update DC BOILER/STATIONARY Third testing
questions with complete solutions


Average Evaporator Rate = 300 x 34.5 pph x .75% load = 7762, 50 pph



1 Month + .8( 7762.50 pph) = 7762.50 pph + 0500 m



1 Month + 6210 pph = 7762.50 pph + .0500 m

-6210 -6210

1 Month = 1552.5 pph + .0500



.9500 m = 1552.5 pph

.9500m .9500



1Month = 1,634.21 pph



Gallons per Month = 1634..33 x 24 x 30 = 141, 252.24 gallons per month

Chemical needed = 141,252.24 gallon / 600 gallon = 235, 40 gallon



Cost per month = 235, 40 gallon x 8.75 = $2,059.75



During a 24 hours operation how often should you check the water level? - ANSWER-Once per shift



A 15 psi steam boiler produces 8000 pound of steam per hour. The

Minimum pipe size for the pipe leaving the boiler is___12__inches.

(Density is 0.037 lbs/ft3)

Equation: - ANSWER-D = 12 (C/d/h /.7854)

D = 12 (.037/60) = 3,603.60

D = .ft = 3,927

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller erickarimi. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $19.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

73243 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$19.99
  • (0)
  Add to cart