Boiler Test – Questions With Correct Solutions
The basic function of an automatic feedwater regulator on a boiler is to:
✔️Ans - maintain proper water level
If one square inch column of water is one foot tall, how much does it weight?
✔️Ans - .433 lbs
Where is the flame sensing device located on a boiler? ✔️Ans - front
Cracking of the boiler can be caused by: ✔️Ans - caustic embrittlement
How would you test the operation of the flame failure device? ✔️Ans - by
shutting off the fuel supply
Where are the combustible gases located in a water tube boiler? ✔️Ans -
flowing around the tubes
What are you preventing by increasing the pressure within a cold boiler
gradually? ✔️Ans - thermal shock
When performing a hydrostatic test, the pressure on the boiler should not
exceed: ✔️Ans - 6% above 1.5 times the MAWP
A boiler operator log must be maintained in a boiler room containing over:
✔️Ans - 100 horsepower
If a flame sensing device noticed that there is a flame failure, what device does
it secure? ✔️Ans - fuel solenoid valve
How is the air to gas ratio maintained within a boiler? ✔️Ans - all of the
above: modulating motor and linkage, air damper, butterfly valve
What type of draft had a fan between the boiler and the chimney ✔️Ans -
induced
What is used to control alkalininty? ✔️Ans - caustic soda
, what is the best way to decide the blowdown frequency of a boiler? ✔️Ans -
boiler water analysis
what device is used to obtain sufficient static head for the returning
condensate in a two-pipe gravity return system? ✔️Ans - return trap
what is the maximum temperature a hot water boiler can be to qualify in NJ as
low pressure? ✔️Ans - 250 F
what type of boiler is a HRT ✔️Ans - fire-tube
what is the purge cycle in a boiler meant to do ✔️Ans - remove
combustible gases
which valve is allowed between the boiler and safety valve ✔️Ans - no
valve
which is a common type of feedwater regulator in a low pressure plant
✔️Ans - pressure sensitive device
when open, an OS&Y valve offers.......to the flow of steam ✔️Ans - no
resistance
what section of the ASME code do hot water heating boilers fall under
✔️Ans - section IV
which describes the combustion chamber of a serpentine tube heating boiler?
✔️Ans - located below the tubes
what should you do if you walked into a boiler room and the safety valves
where popped ✔️Ans - secure the fire at the burner
what letter stamp denotes a low pressure boiler ✔️Ans - H
in NJ how often should boilers over 100 hp be inspected internally and
externally ✔️Ans - annually
a manometer is calibrated in what units of measurement ✔️Ans - inches of
water
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LeCrae. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.