The packet tracer file for the exercise can be found on blackboard.
Device IP Address Default Gateway VLAN ID VLAN Name
PC0 192.168.0/27 192.168.1.1 10 Prod
PC1 192.168.1.32/27 192.168.1.33 20 Dev
PC3 192.168.1.64/27 192.168.1.65 30 Marketing
PC4 192.168.1.96/27 192.168.1.97 40 HR
Device I...
The packet tracer file for the exercise can be found on blackboard.
Devic IP Address Default VLAN ID VLAN Name
e Gateway
PC0 192.168.0/27 192.168.1.1 10 Prod
PC1 192.168.1.32/27 192.168.1.33 20 Dev
PC3 192.168.1.64/27 192.168.1.65 30 Marketing
PC4 192.168.1.96/27 192.168.1.97 40 HR
Complete these steps in order to create a VLAN.
1. Decide whether to use VTP in your network.
With VTP, you can make configuration changes centrally on a single
switch, and you can automatically communicate those changes to all the
other switches in the network. The default VTP mode on the Catalyst
2900XL, 3500XL, 2950, 2970, and 2940 Switches is the server mode.
Note: Issue the show vtp status command in order to check the VTP
status on XL Series Switches.
3524XL#show vtp status
VTP Version :2
Configuration Revision :0
Maximum VLANs supported locally : 254
, Number of existing VLANs :5
VTP Operating Mode : Server
!--- This is the default mode.
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xBF 0x86 0x94 0x45 0xFC 0xDF 0xB5 0x70
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
2. After you set and verify the VTP domain, begin to create VLANs on the
switch.
By default, there is only a single VLAN for all ports. This VLAN is
called default . You cannot rename or delete VLAN 1.
Issue the show vlan command in order to check the VLAN information.
3524XL#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
Fa0/5, Fa0/6, Fa0/7, Fa0/8,
Fa0/9, Fa0/10, Fa0/11, Fa0/12,
Fa0/13, Fa0/14, Fa0/15, Fa0/16,
Fa0/17, Fa0/18, Fa0/19, Fa0/20,
Fa0/21, Fa0/22, Fa0/23, Fa0/24,
Gi0/1, Gi0/2
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode
Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 1002 1003
1002 fddi 101002 1500 - - - - - 1 1003
1003 tr 101003 1500 1005 0 - - srb 1 1002
1004 fdnet 101004 1500 - - 1 IBM - 0 0
1005 trnet 101005 1500 - - 1 IBM - 0 0
Issue this set of commands in privileged mode in order to create another
VLAN:
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller THEEXCELLENCELIBRARY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
