Fire Apparatus Driver Operator - MWS Module 4 Question and answers 100% correct 2023/2024

Fire Apparatus Driver Operator - MWS Module 4 Question and answers 100% correct 2023/2024Water Types - correct answer Salt Water - Corrosive to the pump and the onboard tank. Make sure that you flush all equipment and the tank with fresh water after drafting with salt water. Corrosive Chemicals - Water containing certain chemicals (e.g., sulfur) is corrosive to the pump and the onboard tank. Make sure that you flush all equipment and the tank with fresh water with water that contains corrosive chemicals. Murky Waters - Water that contains a lot of particulates (e.g., sand and silt) that are too small to be filtered by the strainer can damage the pump. This is on of the most common problems with natural static sources. The small debris passes through the filter and, over time, will abrade the impeller in the pump. In additio