Woodworking 1 Final Exam All Possible Questions and Answers with complete solution

Dado - Answer A cut you make on the table saw that uses several blades together to make a groove in the board Relief Cut - Answer A cut you make on the band saw before making long curved cuts Irregular - Answer A cut on the band saw that is not straight but is at an angle and or curved Kickback - Answer When a board gets stuck between the blade and the fence and comes back at you Miter Gauge - Answer Used to cut across the grain of the board Blind Dado - Answer When you use several blades on the table saw to make a groove but you do not cut all the way through the board Rabbet - Answer When you cut a groove at the end of the board Compound Miter - Answer Cutting two angles across a board at the same time Crosscut - Answer Cutting across the grain of the wood using the miter gauge Rip - Answer Cutting with the fence going with the grain of wood Miter - Answer Cutting at an angle across the board Fence - Answer Used to cut with the grain of the board Thickest board you can put through the planer - Answer 8 inches Widest board you can put through the planer - Answer 24 inchesWhere should you not stand when operating the planer - Answer Behind the board Planer: What makes the infeed rollers differemt from the outfeed rollers - Answer Indeed have grooves Maximum depth of cut for jointing an edge - Answer 1/8 of an inch Maximum depth of cut for jointing a surface - Answer 1/16 of an inch Shortest board you can put through the jointer - Answer 10 inches