Electrical Installation and Maintenance (100% Verified Answers)

tools correct answers are handheld devices used to carry out a particular function equipments correct answers are electrical driven devices that are used to achieve a specific objective screwdriver correct answers tools that are made of steel hardened and tempered at the tip used to loosen or tighten screws with slotted heads flat screw driver, phillips screwdriver, stubby screwdriver, allen screwdriver correct answers 4 screw drivers hammers correct answers tool used in driving or pounding and pulling out nails claw hammers, mallet, ball-peen hammer correct answers 3 types of hammer claw hammer correct answers used for driving nails and pulling out nails mallet correct answers used to bend and shape sheet metal, since it doesnt leave marks ball peen hammer correct answers aka machinists hammer, good choice for working w metal pliers correct answers Made from metal with insulators in the handle that are used for cutting, twisting ,bending , and gripping wires and cable. combination pliers, side cutting pliers, long nose pliers correct answers 3 types of pliers wire stripper correct answers tool used for removing insulation of medium sized electrical wires Electrician's Knife correct answers A tool used by a lineman to remove insulation from a large cables, low and high transmission lines portable electric drill correct answers A small drilling machine with a chuck capacity of 1/4" to 3/8". It is used in making holes on metal sheets and concrete walls.. hacksaw correct answers used to cut metal, conduit and armored cable Allesandro Volta. correct answers developed the first battery test light correct answers Used to determine the presence of current in a given circuit. micrometer correct answers used to measure the diameter of wires and/or conductor in circular mills. it measures all sizes of wires and cables