BECC Mod II Questions and Answers with Complete Solutions

BECC Mod II Questions and Answers with Complete Solutions Who serves as a Plant Control Officer in the absence of the Engineering Officer? Main Propulsion Assistant Whose duties include overseeing, maintenance of all propulsion, auxiliary machinery and DC Equipment? Engineering Officer Who sis responsible for supervising the Engineering Officer Of the Watch (EOOW) during restricted maneuvering evolutions? Engineering Officer After normal working hours, who is charged with the safe and proper operation of the ships engineering plant in port? Engineering Duty Officer Which Engineering document takes precedence over all others? Night Orders Who is responsible for reviewing the night orders? All Watch Standers In the Engineering Department, what is used to provide guidance in those instances where specific procedures and policies don't already exist, such as casualty steering policy? Engineering Officers Standing Orders The document that is used to modify the Engineering Officers Standing Orders and prolong special evolution is the _________________. Special Operating Orders What is the normal duty of the cold iron watch? Ensure the proper and safe operation of machinery A Cold Iron watch stander is considered properly relieved when the oncoming watch stander has met all of the following requirements EXCEPT: Has permission from the Sounding and Security Watch The Cold Iron watch is NOT responsible for _____. Operating ships generators. Import watches, under normal conditions, follow a predictable rotation of every ___ hours. Four The Cold Iron watch reports directly to the ________. Engineering Duty Officer What is the normal duty of a Cold Iron Watch? Take readings on equipment. Which instrument is designed to measure temperatures above 300*? Bravo - Pyrometer Which instrument is used to indicate level at a remote station? Alpha - tank level indicator Which of the following is NOT a major component part of the magnetic float type TLI? Sounding Device (T/F) Instrument ECHO is used to measure tank levels. True What is the unit of measurement for vacuum gauges? inches of mercury Which type of thermometry uses two dissimilar metals that are fused together? bimetallic Which of the following is a legal record in the engineering department? Bell Book (T/F) The engineering log is a record of engineering system status and operational events on surface ships, and is one of the two legal records maintained by the engineering department. True How long is the engineering legal log retained on board? 3 Years The log that provides the day-today record of events pertaining to engineering plant is the _____________. Engineering Log Engineering Operating Procedures are found in ______. EOSS Any change to EOSS ,just be authorized by the ____________. Commanding officer What part of EOP provides tank capacity? Tank Status Diagrams Master Plant Procedures (MP's) are the overall controlling documents used by the _____. EOOW Which parts of the EOCC must be memorized? Controlling and Immediate Actions In what part of EOSS are the controlling actions found? Engineering Operational Casualty Control What is used by space supervisors to help keep track of what equipment is on line? Status Chart (T/F) Immediate actions detain the sequential steps necessary to stabilize , gain control, and stop the cascading effect of the casualty. True Equipment locking devices are used on all of the following EXCEPT..... Bilge Pumps Who is responsible for security of the reduction gear? Engineer Officer (T/F) The physical security program is used to safeguard the ship from sabotage. True Before Removal of any inspection plate, fitting, or cover that permits access to the main reduction gear the ____________ officer must be present. Engineering What in-port watch is responsible for the physical security of the ship and takes control of security forces in the event of a security alert? CDO (T/F) Compressed air should routinely be used to perform general space clean-up. False Combustible materials must be protected from ___________. sparks and flames. (T/F) Rags should be left under leaking machinery to prevent the accumulation of oil. False When working with suspended lords, which pf the following safety equipment should be worn? Hard Hat (T/F) Corfram Shoes are authorized to wear while standing engineering watches? False Which procedure does NOT need to be accomplished when removing vertical ladders? Post a Watch On the Oil Water Separator system; what is mounted in the OWHT that automatically shuts down the system when the OWHT drops to 10% full? Liquid Level Sensor Switch What principles does the oil water separator work on? Gravity separation and coalescence. What principle is used in the second stage of OWS to separate oil that was not separated in the first stage? Coalescence Which Tank received separated oil from the OWS for later discharge? WOT (waste oil tank) Which numbered arrow points to the seat? 5 Which numbered arrow points to the body? 6 What types of vales are small, spring loaded, and designed to give an audible warning of dangerous pressure? Sentinel Valves What is the handwheel color code for the sewage system? Gold What systems use Valves with dark green hand wheels? salt water What numbered arrow points to the bonnet? 2 Which valve is used on system lines to prevent over pressurization? Relief Which Valve is susceptible to damage from fluid slapping its components if used for throttling? Gate What system uses valves with purple handwheels? JP-6 what system uses valves with dark blue handwheels? Potable water What is NOT a characteristic of shipboard insulating material? Elastic Which chapter in the Naval Ships Technical Manual lists the requirements for the ship type and thickness of thermal insulation installed on ship piping? 635 The purpose of a plane safety shield is to...... prevent oil spray Removable covers must overlap the adjoining pipe a minimum of ...... inches. 2 What proves detailed procedures for performing preventative maintenance? MRC The SYSCOM MRC control number on the MRC must match the number on the ...... MIP What serves as the table of contents for the work center PMS manual? list of effective pages (LOEP) The SYSCOM Control Number assigned for each maintenance requirement listed in a MIP must match the number on the corresponding..... MRC (T/F) Short sleeved shirts are authorized to wear while working in the engine room. False Who is responsible for ensuring that PMS is performed on eyewash stations? Division Officer Single Hearing protection is required when the continuous noise levels are greater than...... 84 dB Electrical Power tools a=must be inspected prior to issue by a qualified...... electrician The inside micrometer uses ......... rods. interchangeable.