Exam (elaborations)
Level 2 Dante Operations Test (Latest) Questions & Answers..
- Course
- Institution
Level 2 Dante Operations Test (Latest) Questions & Answers..
[Show more]
Content preview
Level 2 Dante Operations Test (Latest) Questions & Answers..Connect the Dante chipsets with the maximum number of audio channels they support:
Dante AV Ultimo-X
PCIe Card HC and IP Core Broadway Brooklyn II Answer- -64x64
-512x512 -4x0, 2x2, 0x4
-16x16
-8x8
-128x128
What protocol does Dante for clocking? Answer- A. NTP
B. PTP
C. SMPTE Time Code
As a simple rule of thumb, how much latency should be allowed per network switch hop? Answer- A. 0.001 msec (1 microsecond)
B. 0.01 msec (10 microseconds)
C. 0.1 msec (100 microseconds) D. 1.0 msec
If a transmitting device runs out of flows, what should you do to enable all subscriptions to be made? Answer- A. Get a managed switch with Packet Propagation Protocol (PPP) to duplicate a stream with new destination IP addresses.
B. Flip stream(s) to unicast so it only takes one flow for multiple destinations.
C. Flip stream(s) to multicast so it only takes one flow for multiple destinations.
D. Add a Dante AVIO "repeater" module, which will accept a stream and retransmit it
with up to 32 more streams.
The redundant port allows for a second network connection in case the first fails. Which describes the operation? Answer- A. Primary and secondary can be connected in the same broadcast domain (VLAN). If one cable fails, the other will take over.
B. The secondary network is dormant until a problem is encoutered on the primary. In that case, the primary network shuts down, and the secondary network starts sending and receiving data.
C. The primary and secondary operate full time in separate broadcast domains. If the
connection fails on one network, it will continue to the other.
D. Dante devices establish redundancy by linking devices in a ring. If one like breaks, the signal can traverse the ring in the other direction.
Approximately how much bandwidth does a unicast audio flow use? (4-ch, 24-bit, 48kHz, 1msec latency Answer- A. 1Mbps
B. 6Mbps
C. 20Mbps
D. 45Mbps
Dante Controller can apply information in a Dante preset to a device of a different model.
For instance, if a 4-channel 70V amplifier is replaced with an 8-channel model, it could save the IP settings,
device name, as well as channel labels and subscriptions for the first four channels Answer- TRUE
FALSE
What is the "golden rule" about Dante redundant networks? Answer- A. Do not link the primary and secondary networks - they must remain in separate broadcast domains.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller EvaTee. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
78291 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now