100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ACI - Aggregate Base Testing Technician 2024/2025 graded A+ $13.49
Add to cart

Exam (elaborations)

ACI - Aggregate Base Testing Technician 2024/2025 graded A+

 1 purchase
  • Course
  • Field tech
  • Institution
  • Field Tech

ACI - Aggregate Base Testing Technician 2024/2025 graded A+

Preview 2 out of 5  pages

  • February 21, 2024
  • 5
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
  • field tech
  • Field tech
  • Field tech
avatar-seller
Qualitydocs
ACI - Aggregate Base Testing
Technician

Testing - ANSSampling should be done very carefully because it is as important as
____________.

Conveyer belts
Transport units
Roadways
Stockpiles - ANSWhat are the four sources from which field samples can be obtained?

contaminated, damaged - ANSSampling containers for aggregate samples should be made
so that the contents will not be lost, _____ or _____.

Nonrepresentative sample - ANSNot using correct procedures for reducing samples to
testing size can result in a _____.

False - ANST or F
Generally, small samples are most representative of the total supply.

True - ANST or F
There are some instances in which differences between test samples can't be avoided.

Laws of chance - ANSWhat determines whether large-size particles are equally distributed
among test samples that have been reduced?

Method A, mechanical splitter - ANSWhich method of reducing a sample must be used with
fine, dry aggregate?

Moisten the sample - ANSWhat must be done to the sample if method B or C is used?

Dry the sample - ANSWhat do you do if the sample is wet and Method A is to be used?

Coarse aggregate, or mixtures of coarse and fine aggregate - ANSMethod C, miniature
stockpiling, cannot be used for which type of aggregate?

Method A - ANSWhich method involves the use of chutes, holding receptacles, and hoppers
or straight-edged pans?

8 - ANSSample splitters must have how many equal width chutes for coarse aggregate?

12 - ANSSample splitters must have how many equal width chutes for fine aggregate?

, conical pile - ANSIn Methods B and C the sample is shoveled into a ____ before it is
flattened and divided.

Canvas blanket or tear resistant tarp - ANSWhen using Method B, what is an alternate
surface that can be used when reducing the sample?

diagonally opposite - ANSWhen quartering a sample, retain two _________ quarters and
reject the other two.

5, random - ANSIn miniature stockpile sampling, obtain the sample by selecting at least
____ increments of material from ____ locations in the stockpile.

60*C/140*F - ANSThe drying apparatus used for dry preparation of a sample is any suitable
device capable of drying samples at a temperature not exceeding _____.

representative, fines - ANSA suitable sample splitter is one capable of obtaining ____
portions of the sample without appreciable loss of ____.

110, 60 - ANSFor particle size analysis, material passing a 2.00mm (No. 10) sieve is
required in amounts equal to approximately ___ g for sandy soils and approximately ___g for
silty or clayey soils.

25, 10 - ANSFor specific gravity, material passing a 2.00mm (10) sieve is requires in
amounts of at least ____g when the volumetric flask is used and at least ____g when the
stoppered bottle is used.

2.00mm (No. 10), Two - ANSFor the physical test, the remaining portion of the material
passing the _____ sieve shall be separated into ____ parts by means of a 0.425mm (40)
sieve.

Pulverizing operation - ANSFor the physical test, if the sample contains brittle particles such
as flakes of mica, fragments of seashells, etc, the ____________ shall be done carefully to
free the finer material that adheres to the coarse particles.

The liquid limit of a soil - ANSWhat is defined as he water content at which the soil passes
from a plastic to a liquid?

corrosion, mass, disintegration - ANS(LL) suitable containers should be made of material
resistant to ____ and not subject to change in ____ or ___ on repeated heating and cooling.

100g - ANS(LL) A sample with a mass of about ___ shall be taken from the thoroughly
mixed portion of the material.

13, one half - ANSWear on the liquid limit device is considered excessive whe the point of
contact on the cup or base exceeds approximately ____mm in diameter, or when any point
on the rim of the cup is worn approximately ____ the original thickness.

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Qualitydocs. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $13.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

67418 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 15 years now

Start selling
$13.49  1x  sold
  • (0)
Add to cart
Added