API 571 Practice Exam #1 Questions And Correct Answers, 100% Verified
3 views 0 purchase
Course
API 571
Institution
API 571
API 571 Practice Exam #1 Questions And Correct Answers, 100% Verified
At what oxygen content would many metals become flammable even at low pressures, whereas they are non-flammable in air?
a) >10%
b) >25%
c) 20-40%
d) >40%
B
4.2.20.1
What area of a heater burning fuel oil with n...
API 571 Practice Exam #1 Questions And Correct Answers, 100% Verified
At what oxygen content would many metals become flammable even at low pressures, whereas they are non-flammable in air?
a) >10%
b) >25%
c) 20-40%
d) >40%
B
4.2.20.1
What area of a heater burning fuel oil with numerous impurities would first suffer damage from fuel ash corrosion.
a) shock tubes
b) radian tubes
c) tube hangers and supports
d) convection tubes
C
4.4.6.4 c)
Hydriding of titanium is a metallurgical phenomenon in which hydrogen diffuses into the titanium and reacts to form an embrittling hydride phase. This can result in a complete loss of ductility with no noticeable sign of corrosion or loss in thickness. Galvanic contact between titanium and more active materials such as carbon steel can have what affect?
a) promotes damage
b) insulates the galvanic system and decreases damage
c) insulates the galvanic system and decreases damage only if pure titanium is used (not titanium alloys)
d) all of the above
A
5.1.3.2.3 c)
When connected to a more anodic material in cooling water:
a) titanium may suffer severe hydriding embrittlement
b) titanium may suffer severe hydriding embrittlement below 180°F (82°C)
c) titanium becomes immune to corrosion
d) titanium becomes almost immune to corrosion
A
4.3.4.3 k)
What form of fatigue cracking develops under the combined effects of cyclic loading and corrosion and are evidenced by ver little plastic deformation where the final fracture may occur by mechanical overload accompanied by plaslic deformation?
a ) corrosion fatigue b) mechanical (vibration) fatigue
c) thermal fatigue
d) all ofthe a bove
A
4.5.2.1
What could ammonium bisulfide corrosion also be called?
a) fuel ash corrosion
b) alkaline fuel ash corrosion
c) alkaline sour water corrosion
d) amine wa ter corrosion
C
5.1.1.2
Typical HF alkylation units operate with 1% to 3% water in the acid, equivalent t o an HF-inwater concentration of 97% to 99% and the temperatures are gener ally below 150°F (66°C). Under these conditions wh at material is widely used for all equipment except where close
tolerances are required for operation (i.e., pumps, valves, instruments)?
a) carbon steel
b) 300 series stainless steels
c) duplex stainless steels
d) nickel alloys
A
5.1.1.6.3 e)
Amine corrosion refers to the gener al and/or localized corrosion th at occurs principally on carbon steel in amine treating processes. Corrosion is not cau sed by the amine itself, but results from dissolved acid gases (COz and HzS), amine degr adation products, heat stable amine salts and other contaminants. Amine corrosion primarily occurs in which materials?
a) carbon steel
b) 300 series st ainless steels
c) ferritic stainless st eels
d) nickel alloys
A
5.1.1.1.2
What is the most important factor related to mechanical fatigue of a piece of equipment?
a) material selection
b) equipment design
c) operating conditions
d) opera ting temper atures
B
4.2.16.3
Temper embrittlement primarily occurs in:
a) Some low alloy steels as a result oflong term exposure from 650oF to 1070oF
b) All carbon and alloy steels as a result of long term exposure from 650oF to 1070oF
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller QUICKEXAMINER. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.98. You're not tied to anything after your purchase.
