AMT2 SWE "A" Study Guide | 100% Correct Answers | Verified | Latest 2024 Version

How do you clean helmet visor? - SOFT CLOTH AND MILD SOAP SOLUTION; RINSE WITH CLEAN WATER. IAW 13520.1B ENCL 4-31 How do you clean flight gloves? - 1. DON THE GLOVES. 2. WASH WITH SOAP AND WATER AS IF WASHING HANDS. 3. WHEN GLOVES ARE CLEAN, RINSE AND REMOVE FROM HANDS. 4. SQUEEZE, BUT DO NOT WRING GLOVES TO REMOVE EXCESS WATER. 5. PLACE THE GLOVES FLAT ON A TOWEL, AND FOLD THE TOWEL TO COVER GLOVES MAKING SURE GLOVES DO NOT CONTACT EACH OTHER. IAW 13520.1B ENCL 5 PAGE 7-27 What is the limit for light corrosion? - A DEPTH OF APPROXIMATELY ONE MIL (0.001 inch) IAW AFTO 1-1A-691 PAGE 4-9 What is a sequencing valve use for in the landing gear? - THESE UNITS ARE SO INTERCONNECTED THAT THEY PERMIT PROPERLY SEQUENCED RETRACTION AND EXTENSION OF THE LANDING GEAR AND THE LANDING GEAR DOORS. IAW A&P GENERAL HANDBOOK PAGE 349 What are torque links purposes? - TORQUE LINKS (FIGURE 9-10) KEEP THE LANDING GEAR POINTED IN A STRAIGHT-AHEAD DIRECTION; ONE TORQUE LINK CONNECTS TO THE SHOCK STRUT CYLINDER, WHILE THE OTHER CONNECTS TO THE PISTON. IAW A&P AIRFRAME HANDBOOK PAGE 348