NACE CIP 1 CBT Exam (Quizzes and Study Questions) 2024.
4 views 0 purchase
Course
NACE CIP 1 CBT
Institution
NACE CIP 1 CBT
NACE CIP 1 CBT Exam (Quizzes and Study Questions) 2024.
How is the process of steel corrosion ALWAYS described?
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel?
zinc, aluminum, magnesi...
As an inspector headed to the job site for the first time, where would you always find instruction
regarding appropriate types of PPE?
Safety Data Sheet (SDS), previously called MSDS
Materials inventory report should contain which of the following?
- quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
The primary function of the coating inspector is _____
specification compliance
High humidity in the air during coating application can cause _____
solvent entrapment
The temperature at which moisture condenses on a surface is called _____
dew point
Where should the steel surface temperature reading be taken?
at the actual work location
What type of water should be added to a sling psychrometer?
distilled
Which type of coating is manufactured with the specific components added to slow down the activity
of the electrochemical cell?
inhibitive
Which coating component forms a stable film that retains its characteristic properties?
binder/resin
A barrier coating interrupts the ______ of the electrochemical cell.
electrolyte
List the three mechanisms by which coatings adhere to a substrate
1. Polar
2. Chemical
3. Mechanical
What is the rule for coating work when it comes to Dew Point and Steel Temperature?
, Steel Temperature must be 5 degrees less than the Dew Point
What characteristics of solvents influence coatings?
- solvency power
- volatility
The contractor's sling psychrometer gives a different reading than your electric hygrometer. What
would you do first as an inspector?
verify calibration of both instruments
Which of the following coating are co-reacting?
- polyurethane
- epoxy
Fusion Bond Epoxy (FBE) is most commonly used to coat ____
pipe
Which coatings may require external moisture to cure?
- single component polyurethane
- solvent borne inorganic zinc
Amine blush is likely to occur with which type of coating?
epoxy
Which type of coating cures the fastest?
Polyurea
When an inorganic Zinc Rich primer is applied too heavily a common result is ______
mud cracking
Commonly used primers for steel structures are ?
- epoxy
- inorganic zinc
- organic zinc
Coatings that cure by polymerization are _____
convertible
Water-borne latex coatings cure by a process known as _____
coalescence
On a blast-cleaned surface, ultraviolet ligt can reveal _____
oil
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller QUICKEXAMINER. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.01. You're not tied to anything after your purchase.
