Osha 30 Crane safety Questions With 100% Solved Solutions!!

standards for crane safety can be found in - Answer-a. 29 cfr 19 subpart cc which of the following is an employer requirement - Answer-d. all of the above you must assure your crane is stable by each except - Answer-b on-board seismograph load charts must - Answer-b. indicate rated lifting capacity ad be visible to operator an annual inspection of each crane is - Answer-d all of the above cranes must maintain a min of ___ feet away from pier lines - Answer-c 10' which of the following is never true of rough terrain cranes - Answer-b. great ability to maneuver with load which two cranes typically use lattice boom - Answer-d truck mounted , crawler which crane type typically has the highest combined capacity for reach and weight - Answer-A. crawler conventional which the of crane is known as a conventional crane - Answer-c crawler side loading the bomb can occur when - Answer-d all of the above If any part of a rt crane tire touches the ground before a lift you should - Answer-b recheck load chart outriggers should - Answer-b lift cranes tires clear of groundthe headache ball and hook are attached to the whip line by a wedge socket - Answer-a. true each of the following is true for lattice boom except - Answer-d. frequently used on rough terrain cranes a truck mounted crane with a hydraulic boom - Answer-c. requires solid level surfaces for setup lattice sections cannot be added or reremoved from lattice cranes (true or false) - Answer-b false short lattice boom - Answer-d. all of the above The counterweight swing area of a crawler crane must be flagged off if there is any possibility of employee injuries from being hit by o pinched - Answer-A true Crawler cranes can operate at - Answer-c 360 degrees Being ___ is critical for long boom on crawler cranes - Answer-C. level a critical pick is one exceeding ___% of the load chart value - Answer-A. 75 ON-board computers will do each of the following except - Answer-d. replace the load chart