Woodshop Safety Test Answers|Complete Questions with Correct Answers

Woodshop Safety Test Answers|Complete Questions with Correct Answers Safety instructions must be given before you are allowed to work on or operate any machine or tool You are not permitted to work on any equipment or machine if the ____________________ is not present instructor Guards and safety devices must be on all machines during operation Machinery must not be oiled or adjusted while in use A machine must be started and stopped only by the operator Do not leave a machine while it is running When working on or near an machine or tool where there is a possibility of eye injury, you must wear eye protection You are not permitted within the safety zone around any machine unless you are the operator loose clothing must be tucked in before you start work, as a precaution against getting entangled If in doubt about any machine, check with the instructor Aisles and working areas must be kept clear of all obstructions The shop floor must be kept free of oil because of the danger of fire and slipping Combustible rags must be kept in a closed red container Do not lift materials heavier than your ability to handle them safely Long pieces of material should be carried by 2 people The attention of the instructor should be directed to any violation of rules Accidents, no matter how slight, must be reported immediately to the instructor carry sharp-pointed tools pointed downward do not leave tools and materials ____________ from a vise or a bench. clamped A dull tool is dangerous because it will skip Pass tools to classmates with the tool handles toward them Do not stand in front of anyone using a sharp tool Carry a hand saw by the handle with the toe pointed downward When using a screwdriver, avoid holding the material in the hand After clamps have been applied to the work, it should not be moved Face shields or googles/glasses must be worn by shop students when there is a possibility of loose debris Whenever possible, the _________ should be clamped project stock