Tattoo Exam
When the armature bar is flat on the front coil, what is the smallest gap above the rear coil?
.010
What does a smaller gap above the rear coil cause?
More power
What should the armature bars be made of?
Plain steel
How does a machine run if too much of the coil is ...
tattoo exam when the armature bar is flat on the f
Written for
Tattoo
All documents for this subject (257)
Seller
Follow
ACADEMICAIDSTORE
Reviews received
Content preview
Tattoo Exam
When the armature bar is flat on the front coil, what is the smallest gap above the rear coil?
.010
What does a smaller gap above the rear coil cause?
More power
What should the armature bars be made of?
Plain steel
How does a machine run if too much of the coil is showing?
Hot
What type of edges should your contact screw have?
Rounded and smooth
Where on the front spring should the contact screw be hitting?
Front and end of spring
What length of spring would run faster?
Short spring with high angle
What type of metal should the contact screw be made of to have the highest conductivity?
Brass
How does the armature bar hit the front coil core?
Flat, full contact
What do you want the frame on your tattoo machine to be?
Non-conductive
What happens when your machine is conductive and electrified?
The armature bar sticks to the coils causing the matching to stay in an "on" setting
What diameter should your post binding be?
5/16
What happens if you use a steel contact screw?
Can cause unwanted spark
When setting up your machine, why would you "snug" down the eye of the needle bar?
,This helps to prevent weak and jumpy lines
Why is a once-piece contact screw the best choice?
Screws with things added on top can cause vibration
What are the two advantages of to using a brass contact screw?
100% conductive and keeps its shape longer than other choices
How much if the contact screw should be touching the front spring?
A tiny contact area
Why should you use plain steel for a spring rather than a coated spring?
The coating wears away quickly, which causes a bad connection
What kind of reaction can you expect from a machine with a very low spring angle?
Spongy and weak
Which type of machine benefits the best from a shorter spring?
A liner
Which spring is the most important for tuning the machine?
The rear spring
A machine that is very hard hitting and fast running moves the needle in and out of the skin so fast
that _____?
It doesn't leave enough pigment behind
What is the ideal width of the springs used on the machine?
The springs should be just as wide as the part they're attached to
What types of screws should you use to hold the coils to the frame?
Always use a magnetic screw that sits flush to the frame
What is the function of the tube vise?
Firmly hold the tube in place and properly align the tube while the machine is in use
How should a tube vise hold a tube in comparison to the machine?
Squarely front to back and side to side
What is the most important part of a tattoo machine?
Coils
What is the purpose of the coils of a tattoo machine?
, To run consistently and not lose power
What is a possible reason for the machine to not work at all?
There is debris between the contact screw and the front spring
What can cause the coils to be in a constant "on" position?
A coil wire, soldering lug, or any of the electrical circuit touching the frame
What does your frame act as for a coil circuit?
The ground
What is not a purpose of the binding posts?
Electrical contact from the soldering lugs to the contact screw
What is a safety feature of the cartridge needles?
If the cartridge is not installed in the machine or tube, then the needles are not exposed; this limits
the possibility of needle stick
What does EPA stand for?
Environmental Protection Agency
What does FDA stand for?
Food and Drug Administration
What does "high level disinfectant" mean?
A chemical agent, registered with the EPA, which has demonstrated tuberculocidal activity
"Office" in the tattoo laws refers to what?
Health licensing Office
What attributes does a container have to have to be considered a "Sharps" container?
Puncture-resistant, leak proof, labeled with a biohazard symbol
How many hours are part of the tattoo licensing program?
360 hours consisting of 210 theory hours and 150 practical hours
What does a completed procedure mean?
A tattoo which has been finished on a live human being, including any touchips or additional work
following initial healing, and the client is released from service.
How long is a tattoo license active for?
1 year
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICAIDSTORE. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.39. You're not tied to anything after your purchase.
