Brakes Test 3 |Complete with A+ Graded Answers

Brakes Test 3 |Complete with A+ Graded Answers Both A & B are correct Technician A says that riveted disc brake pads are often quieter that bonded disc brake pads. Technician B says that integrally molded disc brake pads are molded into holes in the steel backing of the pads. Which technician is correct? Technician A only Neither A nor B are correct Both A & B are correct Technician B only A) Aid cooling Rotors are vented to: B) Increase strength D) Reduce the rotor weight C) Reduce material cost A) Aid cooling D) Low-drag caliper A quick take-up master cylinder is required when what type of caliper design is used on a vehicle? C) Two-piston caliper B) Sliding caliper A) Fixed caliper D) Low-drag caliper E) Both A & B are correct When the pressure in a disc brake caliper is released, the piston is moved back in the cylinder by: B) The action of the piston seal A) Rotor runnout C) The leverage of the caliper arms D) Spring pressure E) Both A & B are correct Both A & B are correct Two technicians are discussing the reason that the brake fluid level in the master cylinder drops. Technician A says that it may be normal due to the wear of the disc brake pads. Technician B says that a low brake fluid level may indicate a hydraulic leak somewhere in the system. Which technician is correct? Both A & B are correct Neither A nor B are correct Technician B only Technician A only D) They are self-energizing Disc brakes have many advantages, some of which are listed below. Which of the following statements does NOT apply to disc brakes? C) They dissipate heat faster