TX Journeyman Plumber Quiz Test With Correct Answers
0 view 0 purchase
Course
TX Journeyman Plumber Quiz Test
Institution
TX Journeyman Plumber Quiz Test
TX Journeyman Plumber Quiz Test
Hot & cold water piping may be tested with _____. - Answer- 50 psi or the working pressure of the water in the system for at least 15 mins
A stack as defined in the code is _____. - Answer- the vertical main of a soil, waste or vent piping which extends one...
a device to prevent backflow into potable water sy
horizontal drainage lines connecting with
Written for
TX Journeyman Plumber Quiz Test
TX Journeyman Plumber Quiz Test
TX Journeyman Plumber Quiz Test
All documents for this subject (1)
Seller
Follow
Gurustudy
Reviews received
Content preview
TX Journeyman Plumber Quiz Test
Hot & cold water piping may be tested with _____. - Answer- 50 psi or the working pressure of
the water in the system for at least 15 mins
A stack as defined in the code is _____. - Answer- the vertical main of a soil, waste or vent
piping which extends one or more stories
A device to prevent backflow into potable water system is called a _____. - Answer- backflow
connection/backflow preventer
Copper tube and fittings used for drainage and vent piping installed above ground shall be at
least _____. - Answer- copper DWV tube
Horizontal drainage lines connecting with horizontal drainage lines shall enter through _____. -
Answer- 45 degree wye branches
The vertical distance between a fixture outlet and the trap weir shall not exceed _____. -
Answer- 24 inches
The critical level of a urinal flushometer vacuum breaker to the highest part of the fixture is
_____. - Answer- 6 inches
Water closet tank ballcocks shall be installed with the vacuum breaker critical level at least
_____. - Answer- 1 inch above the full opening of the overflow tube
The maximum distance of a gas shutoff valve from a gas appliance (except for range and dryer
connections) is _____. - Answer- 6 feet
The minimum size of any piping outlet for a free standing gas range shall be _____. - Answer-
3/4 of an inch
A plumbing permit expires if work authorized by the permit is not started within _____. - Answer-
180 days
A fixture trap is vented to _____. - Answer- prevent the loss of trap seal, reduce noise in the
drainage system & prevent siphonage or backpressure to a trap
Standpipe receptors for clothes washers shall extend above the trap no less than ______. -
Answer- 18 inches
Where nonferrous pipe is brazed for gas piping, the brazing materials shall have a melting point
in excess of _____ degrees Farenheit. - Answer- 140
The principal artery of the venting system to which branches may be connected is called ____. -
Answer- main vent
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Gurustudy. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $18.81. You're not tied to anything after your purchase.
